Industrial door motor replacement in Jarrow

At a glance

Industrial door motor replacement for roller shutters, sectional doors and sliding doors in Jarrow. We diagnose the fault, match a new drive to the door and re-commission it with safety devices tested.

Town: Jarrow
Postcode district: NE32
Area: Tyne and Wear
Guide price: £845 – £2,395

How we look after doors in Jarrow

Written records. A record of the work and tests for your maintenance file.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Matched drives. Motor torque, speed and mounting matched to the door's weight and size.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.

Typical scopes of work

Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.

Powered door rules that apply in Jarrow

Jarrow is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

On a first visit we record each door's make, size, control type and condition. That record makes later repairs quicker to price and helps you plan replacements before a door fails.

Guide prices for industrial door motor replacement

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Industrial door motor replacement in Jarrow: your questions

Do you replace motors on any make of door across Tyne and Wear?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Tyne and Wear, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

How much does an industrial door motor replacement cost in Jarrow?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Jarrow costs £145 to £195 ex VAT.

How soon can a door motor in Jarrow be replaced?

Many common motors can be sourced quickly, and fitting usually takes a few hours once the drive is on site. Specialist or obsolete motors may need ordering; we tell you the lead time with the quote.

Industrial door motor replacement near Jarrow

Besides Jarrow, we can survey and quote for sites in Hebburn, Wallsend, South Shields and the rest of Tyne and Wear.

Other services in Jarrow

More about Industrial door motor replacement · industrial doors in Jarrow. Last updated 19 October 2026.