Bollards and door protection in Kingston upon Thames

At a glance

Loading bays take a beating from reversing trailers. At sites in Kingston upon Thames, we can replace worn dock bumpers, add wheel guides and fit corner bollards to protect doors, levellers, shelters and the building itself.

Town: Kingston upon Thames
Postcode district: KT1
Area: Greater London
Survey: Free for new installations

Options that matter on site

High visibility. Yellow or yellow-and-black finishes that drivers notice.
Guide-rail guards. Guards over the base of door guides and tracks, where most hits land.
Dock bumpers. Fresh bumpers keep trailers off the wall, the leveller and the shelter.
Polymer bollards. Bollards that flex on impact, sparing the floor, the vehicle and themselves.
Frame buffers. Rubber or polymer buffers on corners and frames at vehicle height.

Examples of work we can quote for

Fitting polymer bollards inside a busy warehouse door to keep forklifts away from the door guides.
Installing wheel guides and corner bollards on a run of loading bays to protect the shelter frames.
Fitting rubber corner buffers to a door frame where pallet trucks clip the wall on a tight turn.

Who is responsible for loading bay equipment at a site in Kingston upon Thames?

The employer or occupier is. PUWER 1998 requires work equipment to be maintained and inspected, and the Workplace Regulations 1992 cover vehicle and pedestrian routes around the dock. In practice that means planned servicing of levellers and doors, daily pre-use checks and a clear procedure to stop trailers moving during loading.

How the work is organised

Most installations in Kingston upon Thames can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.

Guide prices for bollards and door protection

Bollards and door protection guide prices
Item	Guide price (ex VAT)
Bollard, installed	£125 – £445 each
Door protection (guide-rail guards, buffers)	£345 – £1,495 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Bollards and door protection in Kingston upon Thames: your questions

Can you protect our existing doors in Kingston upon Thames?

Yes. Guards, buffers and bollards are fitted around existing doors and frames. If a guide or frame is already bent, we recommend repairing it first so the door runs properly behind its new protection.

Do you replace dock bumpers across Greater London?

Yes. We replace worn dock bumpers and fit wheel guides and corner bollards at loading bays across Greater London, often during a leveller service or bay refurbishment to save a separate visit.

How long does it take to fit door protection in Kingston upon Thames?

Usually a few hours per door for base-plated bollards and guide guards. Bollards set in foundations take longer because of coring or excavation, and are often fitted out of hours to avoid disrupting traffic.

Bollards and door protection near Kingston upon Thames

Kingston upon Thames is in the KT1 postcode district in Greater London. We also cover Surbiton, New Malden, Twickenham.

Other services in Kingston upon Thames

More about Bollards and door protection · industrial doors in Kingston upon Thames. Last updated 19 October 2026.