In short
Protect new or existing doors in Putney (SW15) with impact protection sized for the trucks and trailers that pass them every day, fitted in a few hours per door with minimal disruption to your traffic.
- Town
- Putney
- Postcode district
- SW15
- Area
- Greater London
- Survey
- Free for new installations
What to specify
- Frame buffers. Rubber or polymer buffers on corners and frames at vehicle height.
- High visibility. Yellow or yellow-and-black finishes that drivers notice.
- Guide-rail guards. Protect the bottom of guides and tracks, where forks and pallets strike most often.
- Steel bollards. Rigid steel posts that stop vehicles firmly in front of guides and frames.
- Wheel guides. Steel guides steer trailers straight into the middle of each bay.
Examples of work we can quote for
- Replacing bent bollards and checking the slab and anchors around them before fitting new fixings.
- Adding steel guide-rail guards to a row of sectional loading doors at a distribution centre.
- Fitting rubber corner buffers to a door frame where pallet trucks clip the wall on a tight turn.
Who is responsible for loading bay equipment at a site in Putney?
The employer or occupier is. PUWER 1998 requires work equipment to be maintained and inspected, and the Workplace Regulations 1992 cover vehicle and pedestrian routes around the dock. In practice that means planned servicing of levellers and doors, daily pre-use checks and a clear procedure to stop trailers moving during loading.
Planning the work around your site
Sites in and around Putney vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Budgeting for bollards and door protection in Putney
| Item | Guide price (ex VAT) |
|---|---|
| Bollard, installed | £125 – £445 each |
| Door protection (guide-rail guards, buffers) | £345 – £1,495 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Putney
How much do bollards cost to install in Putney?
Our guide price is £125 to £445 ex VAT per installed bollard, depending on size, material and fixing. Guide-rail guards and buffers are £345 to £1,495 per door. We confirm a fixed price in writing after a free survey in Putney.
Can bollards at our Putney site be replaced after a strike?
Yes. Damaged bollards and guards can usually be replaced individually. We check the fixings and the slab around them first, because a bent bollard often loosens its anchors or cracks the concrete at its base.
Will fitting bollards damage the floor at our Putney site?
We check slab thickness and look for buried services before drilling. Polymer bollards and proper foundations reduce the risk of slab cracking on heavy impacts, and we recommend the right fixing for your floor.
Bollards and door protection near Putney
Putney is in the SW15 postcode district in Greater London. We also cover Barnes, Fulham, Hammersmith.
- Bollards and door protection in Barnes
- Bollards and door protection in Fulham
- Bollards and door protection in Hammersmith
- Bollards and door protection in Wimbledon
- Bollards and door protection in Chiswick
- Bollards and door protection in Chelsea
Other services in Putney
- Sliding and folding industrial doors
- Industrial door replacement
- Planned maintenance contracts
- Door automation and controls
- Fire shutters
- Door safety upgrades
- Industrial roller shutters
- Industrial door installation
More about Bollards and door protection · industrial doors in Putney. Last updated 19 October 2026.
