In short
Protect new or existing doors in Watford (WD17) with impact protection sized for the trucks and trailers that pass them every day, fitted in a few hours per door with minimal disruption to your traffic.
- Town
- Watford
- Postcode district
- WD17
- Area
- Hertfordshire
- Survey
- Free for new installations
What we fit in Watford
- Polymer bollards. Bollards that flex on impact, sparing the floor, the vehicle and themselves.
- Steel bollards. Rigid steel posts that stop vehicles firmly in front of guides and frames.
- Frame buffers. Rubber or polymer buffers on corners and frames at vehicle height.
- Dock bumpers. Fresh bumpers keep trailers off the wall, the leveller and the shelter.
- High visibility. Bright finishes make protection easy for drivers to see and avoid.
What this work can involve
- Replacing worn-through dock bumpers so reversing trailers stop short of the wall and the leveller lip.
- Adding steel guide-rail guards to a row of sectional loading doors at a distribution centre.
- Fitting polymer bollards inside a busy warehouse door to keep forklifts away from the door guides.
What the law expects at a loading bay
Across Great Britain, including Watford, loading bays bring together several duties: maintained work equipment under PUWER 1998, safe traffic routes under the Workplace Regulations 1992, and safe powered doors under the Supply of Machinery (Safety) Regulations 2008. Dock levellers should meet BS EN 1398, and the site's risk assessment should cover vehicle creep and drive-aways.
Access, phasing and timing
For busy sites in Hertfordshire the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.
Guide prices for bollards and door protection
| Item | Guide price (ex VAT) |
|---|---|
| Bollard, installed | £125 – £445 each |
| Door protection (guide-rail guards, buffers) | £345 – £1,495 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about bollards and door protection
Can you protect our existing doors in Watford?
Yes. Guards, buffers and bollards are fitted around existing doors and frames. If a guide or frame is already bent, we recommend repairing it first so the door runs properly behind its new protection.
Which bollards suit our Watford warehouse?
Steel bollards suit most yards and external doors; polymer bollards suit busy internal routes where they will be hit often. The slab and vehicle weights decide the fixing. We recommend after seeing where your doors are being struck.
How much do bollards cost to install in Watford?
Our guide price is £125 to £445 ex VAT per installed bollard, depending on size, material and fixing. Guide-rail guards and buffers are £345 to £1,495 per door. We confirm a fixed price in writing after a free survey in Watford.
Bollards and door protection near Watford
Watford is in the WD17 postcode district in Hertfordshire. We also cover Bushey, Rickmansworth, Borehamwood.
- Bollards and door protection in Bushey
- Bollards and door protection in Rickmansworth
- Bollards and door protection in Borehamwood
- Bollards and door protection in Ruislip
- Bollards and door protection in Harrow
- Bollards and door protection in St Albans
Other services in Watford
- Hangar and large-span doors
- Door safety upgrades
- Industrial door installation
- Dock levellers
- Sliding and folding industrial doors
- Door automation and controls
- Complete loading bays
- Industrial door replacement
More about Bollards and door protection · industrial doors in Watford. Last updated 19 October 2026.