Bollards and door protection in Whitstable

At a glance

Protect new or existing doors in Whitstable (CT5) with impact protection sized for the trucks and trailers that pass them every day, fitted in a few hours per door with minimal disruption to your traffic.

Town: Whitstable
Postcode district: CT5
Area: Kent
Survey: Free for new installations

What to specify

Wheel guides. Apron guides that centre trailers on the bay.
Steel bollards. Rigid steel posts that stop vehicles firmly in front of guides and frames.
Frame buffers. Rubber or polymer buffers on corners and frames at vehicle height.
High visibility. Bright finishes make protection easy for drivers to see and avoid.
Polymer bollards. Bollards that flex on impact, sparing the floor, the vehicle and themselves.

Typical scopes of work

Placing bollards beside a fire shutter so stored goods and trucks cannot obstruct its closing line.
Fitting rubber corner buffers to a door frame where pallet trucks clip the wall on a tight turn.
Replacing bent bollards and checking the slab and anchors around them before fitting new fixings.

Loading bay safety in England

Dock levellers, shelters and restraints are work equipment, so in Whitstable the business running the site must keep them in efficient working order under PUWER 1998, and keep traffic routes safe under the Workplace Regulations 1992. Dock levellers are built to BS EN 1398; powered loading bay doors are covered by the Supply of Machinery (Safety) Regulations 2008 and BS EN 12453.

Planning the work around your site

Sites in and around Whitstable vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Budgeting for bollards and door protection in Whitstable

Bollards and door protection guide prices
Item	Guide price (ex VAT)
Bollard, installed	£125 – £445 each
Door protection (guide-rail guards, buffers)	£345 – £1,495 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Whitstable

How long does it take to fit door protection in Whitstable?

Usually a few hours per door for base-plated bollards and guide guards. Bollards set in foundations take longer because of coring or excavation, and are often fitted out of hours to avoid disrupting traffic.

Do you replace dock bumpers across Kent?

Yes. We replace worn dock bumpers and fit wheel guides and corner bollards at loading bays across Kent, often during a leveller service or bay refurbishment to save a separate visit.

Which bollards suit our Whitstable warehouse?

Steel bollards suit most yards and external doors; polymer bollards suit busy internal routes where they will be hit often. The slab and vehicle weights decide the fixing. We recommend after seeing where your doors are being struck.

Bollards and door protection near Whitstable

Whitstable is in the CT5 postcode district in Kent. We also cover Herne Bay, Canterbury, Faversham.

Other services in Whitstable

More about Bollards and door protection · industrial doors in Whitstable. Last updated 19 October 2026.