Cold store and freezer doors in Beverley

In short

We can install sliding, hinged and high-speed cold store doors in Beverley and across the East Riding of Yorkshire, coordinating with your refrigeration engineer so the room is back at its working temperature quickly after the change.

Town: Beverley
Postcode district: HU17
Area: East Riding of Yorkshire
Survey: Free for new installations

What we fit in Beverley

Inside release. An emergency release on the inside face so nobody can be shut in.
Hygienic finishes. Plastisol-coated steel, stainless steel or GRP for food and pharmaceutical use.
Tight seals. The leaf pulls in against its gaskets on closing so cold air stays where it belongs.
Impact protection. Protection around the opening helps stop forklifts damaging expensive insulated leaves.
Pressure relief. Relief valves to balance pressure after the door closes or during defrost.

What this work can involve

Adding a heated pressure relief valve to a freezer room where suction makes the door hard to open once it closes.
Fitting a hinged chiller door with a stainless steel finish to a walk-in cold room in a commercial kitchen.
Motorising a heavy manual cold store door with pull-cord activation, a safety edge on the closing leaf and photocells.

Powered door rules that apply in Beverley

Beverley is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices for cold store and freezer doors

Cold store and freezer doors guide prices
Item	Guide price (ex VAT)
Cold store / freezer door (sliding)	£6,495 – £17,995
High-speed fabric door	£7,495 – £15,995

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Cold store and freezer doors in Beverley: your questions

How much does a cold store or freezer door cost in Beverley?

Our guide price for a sliding cold store or freezer door is £6,495 to £17,995 ex VAT, supplied and fitted. Size, temperature, insulation and electric operation set the final price, confirmed in writing after a free survey in Beverley.

Can our cold store door in Beverley be made electric?

Often, yes, if the leaf and track are sound, or with a new electric sliding door. Powered cold store doors need safety edges and photocells and a drive suited to the temperature.

Why is our cold room door in Beverley hard to open after it closes?

Usually negative pressure: air inside cools and contracts once the door seals. A correctly sized pressure relief valve, heated on freezers, solves this. We check for one on survey and can fit it with a new door.

Cold store and freezer doors near Beverley

Working in Beverley? We also take on jobs in Hull, Bridlington, Scunthorpe and across the East Riding of Yorkshire.

Other services in Beverley

More about Cold store and freezer doors · industrial doors in Beverley. Last updated 19 October 2026.