Sliding and folding industrial doors in Beverley

Quick answer

For agricultural and industrial buildings in Beverley, we can replace worn sliding doors, upgrade them with new tracks and leaves, or automate them with the safety devices a powered door needs.

Town: Beverley
Postcode district: HU17
Area: East Riding of Yorkshire
Survey: Free for new installations

Options for sliding and folding industrial doors in Beverley

Top-hung or bottom-rolling. Weight carried overhead or on a floor rail, chosen to suit the structure.
Wicket doors. Pass doors built into a leaf so staff need not open the whole door.
Insulated options. Insulated panel infill and edge seals for heated buildings.
No headroom needed. Leaves move sideways, so nothing coils above or runs under the roof.
Wide spans. Very wide openings are handled by adding leaves, so width is rarely a limit.

Typical scopes of work

Replacing a damaged floor rail and guide wheels on a bottom-rolling door struck by a vehicle.
Replacing worn timber sliding doors on a storage building with steel-framed bottom-rolling doors and a wicket door.
Installing telescopic sliding doors where the wall space to one side is limited by an adjoining structure.

Who is responsible for door safety at a site in Beverley?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Access, phasing and timing

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Guide prices for sliding and folding industrial doors

Sliding and folding industrial doors guide prices
Item	Guide price (ex VAT)
Sliding / folding industrial doors	£5,995 – £24,995
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Beverley

Can our existing sliding doors in Beverley be motorised?

Often, if the leaves and track are in good condition. We assess the doors, fit a drive and the safety devices needed, and take on the conformity responsibilities that come with converting a manual door to power.

Which is better for our Beverley site, top-hung or bottom-rolling?

Top-hung keeps the floor flush but needs a strong structure overhead. Bottom-rolling suits lighter buildings but needs a clean, protected floor rail. We recommend one after checking both on survey.

Do you fit sliding doors on farm buildings around the East Riding of Yorkshire?

Yes. We supply and fit steel sliding doors on agricultural buildings across the East Riding of Yorkshire, including timber-clad leaves, bottom-rolling gear for lightweight portal frames and wicket doors so staff and livestock handlers can get in without opening the main leaves.

Sliding and folding industrial doors near Beverley

Working in Beverley? We also take on jobs in Hull, Bridlington, Scunthorpe and across the East Riding of Yorkshire.

Other services in Beverley

More about Sliding and folding industrial doors · industrial doors in Beverley. Last updated 19 October 2026.