The short version
We can supply and fit steel sliding and bi-folding doors in Lincolnshire and across the East Midlands, manual or electric, with insulated or single-skin leaves and wicket doors wherever staff need everyday access.
- Area
- Lincolnshire
- Nation
- England
- Main town
- Lincoln
- Survey
- Free for new installations
Options for sliding and folding industrial doors in Lincolnshire
- Wide spans. Very wide openings are handled by adding leaves, so width is rarely a limit.
- Top-hung or bottom-rolling. We hang the door from above or run it on a floor rail depending on what the building can support.
- Wicket doors. Pass doors built into a leaf so staff need not open the whole door.
- Folding leaves. Where there is little wall either side, folding leaves concertina into a compact stack.
- Insulated options. Insulated panel infill and edge seals for heated buildings.
What this work can involve
- Renewing seized trolleys and a distorted overhead track on large sliding doors to a vehicle shed.
- Fitting bi-folding doors to a maintenance workshop where overhead gantry cranes rule out a roller shutter or sectional door.
- Adding a steel support beam and top-hung track so a sliding door leaves the floor flush for forklifts.
Powered door rules that apply in Lincolnshire
Lincolnshire is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Planning the work around your site
Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.
Prices for sliding and folding industrial doors in Lincolnshire
| Item | Guide price (ex VAT) |
|---|---|
| Sliding / folding industrial doors | £5,995 – £24,995 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about sliding and folding industrial doors
How much do sliding or folding industrial doors cost in Lincolnshire?
Our guide price is £5,995 to £24,995 ex VAT, supplied and fitted, depending on size, number of leaves, infill and whether the doors are manual or electric. After a free survey in Lincolnshire we confirm the fixed price in writing.
How long does it take to fit sliding doors in Lincolnshire?
A pair of manual sliding doors on a sound structure is usually fitted in a day or two. Large folding doors, electric operation and new steelwork add time, which we set out with your quote.
Which is better for our Lincolnshire site, top-hung or bottom-rolling?
Top-hung keeps the floor flush but needs a strong structure overhead. Bottom-rolling suits lighter buildings but needs a clean, protected floor rail. We recommend one after checking both on survey.
Towns in Lincolnshire we cover
We cover 10 towns in Lincolnshire for sliding and folding industrial doors, including Lincoln, Grimsby, Scunthorpe, Boston.
Other services in Lincolnshire
- Door safety upgrades
- Industrial roller shutters
- Cold store and freezer doors
- Insulated roller shutter doors
- Planned maintenance contracts
- Steel personnel and fire exit doors
- Fire shutters
- Complete loading bays
More about Sliding and folding industrial doors. Last updated 19 October 2026.