In short
Is your freezer door icing up or failing to seal at your Sevenoaks site? We replace worn cold store doors with insulated sliding or hinged doors, heated frames and pressure relief where needed.
- Town
- Sevenoaks
- Postcode district
- TN13
- Area
- Kent
- Survey
- Free for new installations
What to specify
- Electric sliding. Powered sliding doors that open on demand and close automatically, with full safety devices.
- Tight seals. Compressible gaskets pressed against the frame as the door closes.
- Impact protection. Protection around the opening helps stop forklifts damaging expensive insulated leaves.
- Hygienic finishes. Plastisol-coated steel, stainless steel or GRP for food and pharmaceutical use.
- Thick insulation. Insulation thickness is chosen for your operating temperature, with heavier leaves for freezers.
Examples of work we can quote for
- Fitting a hinged chiller door with a stainless steel finish to a walk-in cold room in a commercial kitchen.
- Adding a heated pressure relief valve to a freezer room where suction makes the door hard to open once it closes.
- Replacing an iced-up sliding freezer door with a new insulated door, heated frame and heated threshold.
Who is responsible for door safety at a site in Sevenoaks?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Keeping your site running during the work
Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Cold store / freezer door (sliding) | £6,495 – £17,995 |
| High-speed fabric door | £7,495 – £15,995 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about cold store and freezer doors
Do you supply cold store doors for food businesses in Kent?
Yes. We supply and fit cold store doors with hygienic finishes for food producers, processors, distributors and commercial kitchens across Kent, and we talk through your hygiene, cleaning and audit requirements at the survey before recommending a finish.
Why is our cold room door in Sevenoaks hard to open after it closes?
Usually negative pressure: air inside cools and contracts once the door seals. A correctly sized pressure relief valve, heated on freezers, solves this. We check for one on survey and can fit it with a new door.
Can you replace a freezer door at our Sevenoaks site without losing stock?
We plan the change with you and your refrigeration engineer. Many doors can be swapped in a day, sometimes with stock moved or the plant set back temporarily, so the room returns to temperature quickly.
Cold store and freezer doors near Sevenoaks
Sevenoaks is in the TN13 postcode district in Kent. We also cover Tonbridge, Orpington, Swanley.
- Cold store and freezer doors in Tonbridge
- Cold store and freezer doors in Orpington
- Cold store and freezer doors in Swanley
- Cold store and freezer doors in Tunbridge Wells
- Cold store and freezer doors in Sidcup
- Cold store and freezer doors in Caterham
Other services in Sevenoaks
- Steel personnel and fire exit doors
- Insulated roller shutter doors
- Industrial roller shutters
- Fire shutters
- Industrial door repairs
- Door automation and controls
- Dock shelters and seals
- Industrial door motor replacement
More about Cold store and freezer doors · industrial doors in Sevenoaks. Last updated 19 October 2026.
