The short version
Is your freezer door icing up or failing to seal at your Worksop site? We replace worn cold store doors with insulated sliding or hinged doors, heated frames and pressure relief where needed.
- Town
- Worksop
- Postcode district
- S80
- Area
- Nottinghamshire
- Survey
- Free for new installations
What we fit in Worksop
- Thick insulation. Insulation thickness is chosen for your operating temperature, with heavier leaves for freezers.
- Heated frames. Heater cables in freezer door frames stop ice welding the seals shut.
- Hygienic finishes. Plastisol-coated steel, stainless steel or GRP for food and pharmaceutical use.
- Tight seals. Compressible gaskets pressed against the frame as the door closes.
- Inside release. An emergency release on the inside face so nobody can be shut in.
What this work can involve
- Fitting a hinged chiller door with a stainless steel finish to a walk-in cold room in a commercial kitchen.
- Motorising a heavy manual cold store door with pull-cord activation, a safety edge on the closing leaf and photocells.
- Protecting new cold store door frames with steel buffers and bollards on a busy forklift route.
Who is responsible for door safety at a site in Worksop?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Planning the work around your site
For busy sites in Nottinghamshire the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.
Guide prices for cold store and freezer doors
| Item | Guide price (ex VAT) |
|---|---|
| Cold store / freezer door (sliding) | £6,495 – £17,995 |
| High-speed fabric door | £7,495 – £15,995 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Why is our cold room door in Worksop hard to open after it closes?
Usually negative pressure: air inside cools and contracts once the door seals. A correctly sized pressure relief valve, heated on freezers, solves this. We check for one on survey and can fit it with a new door.
Do you repair cold store doors in Worksop?
Yes. We replace gaskets, frame heaters, rollers, tracks, releases and drives on most makes. Repair visits are chargeable, and we quote before larger repairs or recommend replacement when the leaf itself has failed.
Can our cold store door in Worksop be made electric?
Often, yes, if the leaf and track are sound, or with a new electric sliding door. Powered cold store doors need safety edges and photocells and a drive suited to the temperature.
Cold store and freezer doors near Worksop
Worksop is in the S80 postcode district in Nottinghamshire. We also cover Retford, Staveley, Mansfield.
- Cold store and freezer doors in Retford
- Cold store and freezer doors in Staveley
- Cold store and freezer doors in Mansfield
- Cold store and freezer doors in Chesterfield
- Cold store and freezer doors in Rotherham
- Cold store and freezer doors in Sutton-in-Ashfield
Other services in Worksop
- Sliding and folding industrial doors
- Door safety upgrades
- Industrial door motor replacement
- Dock shelters and seals
- Fire shutter servicing and drop tests
- Industrial roller shutters
- Bollards and door protection
- Industrial door repairs
More about Cold store and freezer doors · industrial doors in Worksop. Last updated 19 October 2026.