The short version
From walk-in chillers to blast freezers, we can supply cold store doors for sites in Derbyshire with food-safe finishes, inside emergency release and electric operation wherever the volume of traffic justifies it.
- Area
- Derbyshire
- Nation
- England
- Main town
- Derby
- Survey
- Free for new installations
What to specify
- Pressure relief. Relief valves to balance pressure after the door closes or during defrost.
- Tight seals. The leaf pulls in against its gaskets on closing so cold air stays where it belongs.
- Thick insulation. Foam-filled leaves sized to the room temperature, from chillers to freezers.
- Hygienic finishes. Smooth, cleanable finishes chosen to meet your hygiene and audit standards.
- Impact protection. Protection around the opening helps stop forklifts damaging expensive insulated leaves.
Examples of work we can quote for
- Renewing worn gaskets and the frame heater on a chiller door that no longer seals properly.
- Protecting new cold store door frames with steel buffers and bollards on a busy forklift route.
- Fitting a hinged chiller door with a stainless steel finish to a walk-in cold room in a commercial kitchen.
Powered door rules that apply in Derbyshire
Derbyshire is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
How the work is organised
For busy sites in the East Midlands the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.
Budgeting for cold store and freezer doors in Derbyshire
| Item | Guide price (ex VAT) |
|---|---|
| Cold store / freezer door (sliding) | £6,495 – £17,995 |
| High-speed fabric door | £7,495 – £15,995 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Cold store and freezer doors in Derbyshire: your questions
What safety release do cold store doors in Derbyshire need?
Every cold store door should open from inside without a key or tool, even when locked from outside. We fit a clearly marked inside release and can add an alarm button connected to a monitored panel.
Do you repair cold store doors in Derbyshire?
Yes. We replace gaskets, frame heaters, rollers, tracks, releases and drives on most makes. Repair visits are chargeable, and we quote before larger repairs or recommend replacement when the leaf itself has failed.
Why is our cold room door in Derbyshire hard to open after it closes?
Usually negative pressure: air inside cools and contracts once the door seals. A correctly sized pressure relief valve, heated on freezers, solves this. We check for one on survey and can fit it with a new door.
Towns in Derbyshire we cover
We cover 12 towns in Derbyshire for cold store and freezer doors, including Derby, Chesterfield, Long Eaton, Ilkeston.
Other services in Derbyshire
- High-speed doors
- Hangar and large-span doors
- Dock levellers
- Industrial door motor replacement
- Planned maintenance contracts
- Industrial door replacement
- Fire shutter servicing and drop tests
- Complete loading bays
More about Cold store and freezer doors. Last updated 19 October 2026.