The short version
Replacing a door motor at a site in Derbyshire is a chance to upgrade the control panel too, adding inverter control, remotes, loops or traffic lights at the same time.
- Area
- Derbyshire
- Nation
- England
- Main town
- Derby
- Guide price
- £845 – £2,395
What's included
- Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
- Obsolete motors. Equivalent drives with adapters where the original model is no longer made.
- Panel upgrades. New control panels with monitored safety inputs and inverter options.
- Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.
- Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.
Examples of work we can quote for
- Changing a tubular motor in a small service shutter that overheats and trips during busy periods.
- Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
- Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.
Who is responsible for door safety at a site in Derbyshire?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Access, phasing and timing
On a first visit we record each door's make, size, control type and condition. That record makes later repairs quicker to price and helps you plan replacements before a door fails.
Budgeting for industrial door motor replacement in Derbyshire
| Item | Guide price (ex VAT) |
|---|---|
| Motor replacement | £845 – £2,395 |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.
Frequently asked questions
Should we replace the whole door instead of the motor in Derbyshire?
If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.
Is the motor really the problem with our door in Derbyshire?
Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.
How much does an industrial door motor replacement cost in Derbyshire?
Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Derbyshire costs £145 to £195 ex VAT.
Towns in Derbyshire we cover
We cover 12 towns in Derbyshire for industrial door motor replacement, including Derby, Chesterfield, Long Eaton, Ilkeston.
Other services in Derbyshire
- Planned maintenance contracts
- Door automation and controls
- Bollards and door protection
- Sliding and folding industrial doors
- Industrial roller shutters
- Dock levellers
- Cold store and freezer doors
- PVC strip curtains
More about Industrial door motor replacement. Last updated 19 October 2026.