Industrial door motor replacement in Staffordshire

Quick answer

Industrial door motor replacement for roller shutters, sectional doors and sliding doors in Staffordshire. We diagnose the fault, match a new drive to the door and re-commission it with safety devices tested.

Area: Staffordshire
Nation: England
Main town: Stoke-on-Trent
Guide price: £845 – £2,395

How we look after doors in Staffordshire

Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.
Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.
Written records. You receive written details of the new drive and test results for your records.

Jobs we can carry out

Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.

Safety law for industrial doors in England

Industrial doors in Staffordshire are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Guide prices

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Industrial door motor replacement in Staffordshire: your questions

How soon can a door motor in Staffordshire be replaced?

Many common motors can be sourced quickly, and fitting usually takes a few hours once the drive is on site. Specialist or obsolete motors may need ordering; we tell you the lead time with the quote.

Will our door in Staffordshire be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Should we replace the whole door instead of the motor in Staffordshire?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Towns in Staffordshire we cover

We cover 10 towns in Staffordshire for industrial door motor replacement, including Stoke-on-Trent, Newcastle-under-Lyme, Burton upon Trent, Cannock.

Other services in Staffordshire

More about Industrial door motor replacement. Last updated 19 October 2026.