The short version
When the original motor on a door in Burton upon Trent (DE14) is no longer made, we fit an equivalent drive with the adapters it needs, set new limits and test closing forces before handover.
- Town
- Burton upon Trent
- Postcode district
- DE14
- Area
- Staffordshire
- Guide price
- £845 – £2,395
What the visit covers in Burton upon Trent
- Written records. A record of the work and tests for your maintenance file.
- Matched drives. Motor torque, speed and mounting matched to the door's weight and size.
- Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
- Obsolete motors. Equivalent drives with adapters where the original model is no longer made.
- Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Typical scopes of work
- Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
- Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.
- Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Powered door rules that apply in Burton upon Trent
Burton upon Trent is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Access, phasing and timing
On a first visit we record each door's make, size, control type and condition. That record makes later repairs quicker to price and helps you plan replacements before a door fails.
Budgeting for industrial door motor replacement in Burton upon Trent
| Item | Guide price (ex VAT) |
|---|---|
| Motor replacement | £845 – £2,395 |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.
Questions from businesses in Burton upon Trent
Can you replace an obsolete door motor in Burton upon Trent?
Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.
Should we replace the whole door instead of the motor in Burton upon Trent?
If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.
Will our door in Burton upon Trent be tested after the motor is changed?
Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.
Industrial door motor replacement near Burton upon Trent
Working in Burton upon Trent? We also take on jobs in Swadlincote, Derby, Lichfield and across Staffordshire.
- Industrial door motor replacement in Swadlincote
- Industrial door motor replacement in Derby
- Industrial door motor replacement in Lichfield
- Industrial door motor replacement in Tamworth
- Industrial door motor replacement in Rugeley
- Industrial door motor replacement in Coalville
Other services in Burton upon Trent
- Sliding and folding industrial doors
- Complete loading bays
- Steel personnel and fire exit doors
- PVC strip curtains
- Dock shelters and seals
- Cold store and freezer doors
- Bollards and door protection
- Sectional overhead doors
More about Industrial door motor replacement · industrial doors in Burton upon Trent. Last updated 19 October 2026.