Industrial door motor replacement in Tamworth

The short version

When the original motor on a door in Tamworth (B79) is no longer made, we fit an equivalent drive with the adapters it needs, set new limits and test closing forces before handover.

Town: Tamworth
Postcode district: B79
Area: Staffordshire
Guide price: £845 – £2,395

What our engineers check and fix

Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Panel upgrades. New control panels with monitored safety inputs and inverter options.
Written records. A record of the work and tests for your maintenance file.
Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
Matched drives. Motor torque, speed and mounting matched to the door's weight and size.

Examples of work we can quote for

Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.
Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.

Powered door rules that apply in Tamworth

Tamworth is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

On a first visit we record each door's make, size, control type and condition. That record makes later repairs quicker to price and helps you plan replacements before a door fails.

Prices for industrial door motor replacement in Tamworth

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Industrial door motor replacement in Tamworth: your questions

Should we replace the whole door instead of the motor in Tamworth?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

How soon can a door motor in Tamworth be replaced?

Many common motors can be sourced quickly, and fitting usually takes a few hours once the drive is on site. Specialist or obsolete motors may need ordering; we tell you the lead time with the quote.

Is the motor really the problem with our door in Tamworth?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Industrial door motor replacement near Tamworth

Besides Tamworth, we can survey and quote for sites in Lichfield, Sutton Coldfield, Aldridge and the rest of Staffordshire.

Other services in Tamworth

More about Industrial door motor replacement · industrial doors in Tamworth. Last updated 19 October 2026.