Steel personnel and fire exit doors in Burton upon Trent

In short

We can supply and install steel doorsets in Burton upon Trent and across Staffordshire, from simple staff entrances to fire-rated and security-rated doors, with the frame, leaf and hardware supplied as one tested set.

Town: Burton upon Trent
Postcode district: DE14
Area: Staffordshire
Survey: Free for new installations

Options for steel personnel and fire exit doors in Burton upon Trent

Security options. From hinge bolts to certified security doorsets, the door can be specified to resist attack.
Panic hardware. Where visitors or the public might need to escape, we fit full-width panic bars to BS EN 1125.
Louvres and vision. Louvred leaves for plant rooms and vision panels where visibility helps.
Galvanised steel. Leaves made from two zinc-coated steel skins, finished in a hard-wearing powder coat.
Emergency devices. Lever or push-pad devices to BS EN 179 for exits used by trained staff.

Jobs we can carry out

Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.
Installing a leaf-and-a-half steel doorset so equipment can pass through a plant room door when needed.
Replacing a rotted timber fire exit door with a galvanised steel doorset and a BS EN 1125 panic bar.

Door rules for workplaces in England

Doors in Burton upon Trent workplaces are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992: a door that can be pushed open from either side must give, when closed, a clear view of the space close to both sides, which is why swing doors on traffic routes have vision panels. Under the Regulatory Reform (Fire Safety) Order 2005, emergency exit doors must open easily and immediately in the direction of escape.

How the work is organised

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Budgeting for steel personnel and fire exit doors in Burton upon Trent

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about steel personnel and fire exit doors

Can our Burton upon Trent fire exit be locked from outside?

Yes. It can be secure from outside, with a key or code device or no external hardware, as long as it always opens from inside using the exit hardware. Never lock or chain a fire exit while people are in the building.

Do you repair fire exit doors across Staffordshire?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Staffordshire. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

Which fire exit hardware do we need at our Burton upon Trent site?

If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.

Steel personnel and fire exit doors near Burton upon Trent

Our teams cover Burton upon Trent (DE14) and nearby Swadlincote, Derby, Lichfield, along with the rest of Staffordshire.

Other services in Burton upon Trent

More about Steel personnel and fire exit doors · industrial doors in Burton upon Trent. Last updated 19 October 2026.