Steel personnel and fire exit doors in Shropshire

In short

We can supply and install steel doorsets in Shropshire and across the West Midlands, from simple staff entrances to fire-rated and security-rated doors, with the frame, leaf and hardware supplied as one tested set.

Area: Shropshire
Nation: England
Main town: Shrewsbury
Survey: Free for new installations

What we fit in Shropshire

Security options. Hinge bolts, multi-point locks and LPS 1175 rated doorsets.
Fire-rated doorsets. Fire-resisting steel doors with the manufacturer's test evidence, fitted to its instructions.
Outside access. Staff can get in from outside with a key or code, but the exit always opens freely from inside.
Galvanised steel. Leaves made from two zinc-coated steel skins, finished in a hard-wearing powder coat.
Complete doorsets. Frame, leaf, hinges and hardware supplied as one set.

Jobs we can carry out

Installing a leaf-and-a-half steel doorset so equipment can pass through a plant room door when needed.
Fitting hinge bolts and a multi-point lock to a steel back door to resist levering and forced entry.
Changing worn panic bars on fire exits and adjusting the overhead closers so each door latches properly.

Which workplace rules apply to these doors?

For premises in Shropshire, the Workplace Regulations 1992 set the basics: doors suitably constructed, swing doors giving a clear view through when closed, and maintenance under regulation 5. Under the Regulatory Reform (Fire Safety) Order 2005, an emergency exit door must open easily in the direction of travel and must not be locked or fastened so it cannot be opened immediately in an emergency.

Keeping your site running during the work

If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.

Prices for steel personnel and fire exit doors in Shropshire

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Steel personnel and fire exit doors in Shropshire: your questions

Can our Shropshire fire exit be locked from outside?

Yes. It can be secure from outside, with a key or code device or no external hardware, as long as it always opens from inside using the exit hardware. Never lock or chain a fire exit while people are in the building.

Which fire exit hardware do we need at our Shropshire site?

If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.

Do you repair fire exit doors across the West Midlands?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across the West Midlands. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

Towns in Shropshire we cover

We cover 5 towns in Shropshire for steel personnel and fire exit doors, including Shrewsbury, Telford, Wellington, Oswestry.

Other services in Shropshire

More about Steel personnel and fire exit doors. Last updated 19 October 2026.