Steel personnel and fire exit doors in Telford

Quick answer

Steel personnel doors and fire exit doors for warehouses, factories, plant rooms and trade units in Telford. We survey each opening, specify the right hardware and rating, then supply and fit a complete steel doorset.

Town: Telford
Postcode district: TF3
Area: Shropshire
Survey: Free for new installations

Options for steel personnel and fire exit doors in Telford

Complete doorsets. Frame, leaf, hinges and hardware supplied as one set.
Security options. From hinge bolts to certified security doorsets, the door can be specified to resist attack.
Fire-rated doorsets. Fire-resisting steel doors with the manufacturer's test evidence, fitted to its instructions.
Galvanised steel. Double-skin galvanised steel leaves with powder-coated finishes.
Panic hardware. Where visitors or the public might need to escape, we fit full-width panic bars to BS EN 1125.

What this work can involve

Changing worn panic bars on fire exits and adjusting the overhead closers so each door latches properly.
Installing a leaf-and-a-half steel doorset so equipment can pass through a plant room door when needed.
Supplying 60-minute fire-resisting steel doorsets for the compartment walls set out in a building's fire strategy.

Which workplace rules apply to these doors?

For premises in Telford, the Workplace Regulations 1992 set the basics: doors suitably constructed, swing doors giving a clear view through when closed, and maintenance under regulation 5. Under the Regulatory Reform (Fire Safety) Order 2005, an emergency exit door must open easily in the direction of travel and must not be locked or fastened so it cannot be opened immediately in an emergency.

How the work is organised

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices for steel personnel and fire exit doors

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Telford

How much is a steel personnel door in Telford?

Our guide price is £845 to £1,795 ex VAT for a single steel personnel door, or £1,095 to £2,395 for a steel fire exit door with panic hardware, supplied and fitted. We confirm the fixed price for your Telford premises in writing after a free survey.

Can you fit fire-rated steel doors in Telford?

Yes. We supply fire-resisting steel doorsets with the manufacturer's test evidence for the rating your fire strategy needs, and install them strictly to the manufacturer's instructions, including seals, gaps and approved hardware.

Which fire exit hardware do we need at our Telford site?

If members of the public or people unfamiliar with the exit may use it, panic hardware to BS EN 1125 is normally required. Exits used only by trained staff who know the door can use emergency devices to BS EN 179. If in doubt, choose BS EN 1125.

Steel personnel and fire exit doors near Telford

Besides Telford, we can survey and quote for sites in Wellington, Bridgnorth, Shrewsbury and the rest of Shropshire.

Other services in Telford

More about Steel personnel and fire exit doors · industrial doors in Telford. Last updated 19 October 2026.