Steel personnel and fire exit doors in Bridgnorth

At a glance

Steel personnel doors and fire exit doors for warehouses, factories, plant rooms and trade units in Bridgnorth. We survey each opening, specify the right hardware and rating, then supply and fit a complete steel doorset.

Town: Bridgnorth
Postcode district: WV16
Area: Shropshire
Survey: Free for new installations

What to specify

Galvanised steel. Leaves made from two zinc-coated steel skins, finished in a hard-wearing powder coat.
Outside access. Staff can get in from outside with a key or code, but the exit always opens freely from inside.
Louvres and vision. Louvred leaves for plant rooms and vision panels where visibility helps.
Fire-rated doorsets. Where a door must hold back fire, we supply tested fire-rated doorsets and fit them exactly as specified.
Panic hardware. Push bars to BS EN 1125 where the public or unfamiliar people may use the exit.

What this work can involve

Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.
Installing a leaf-and-a-half steel doorset so equipment can pass through a plant room door when needed.
Changing worn panic bars on fire exits and adjusting the overhead closers so each door latches properly.

Door rules for workplaces in England

Doors in Bridgnorth workplaces are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992: a door that can be pushed open from either side must give, when closed, a clear view of the space close to both sides, which is why swing doors on traffic routes have vision panels. Under the Regulatory Reform (Fire Safety) Order 2005, emergency exit doors must open easily and immediately in the direction of escape.

Keeping your site running during the work

Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.

Budgeting for steel personnel and fire exit doors in Bridgnorth

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

Can you fit fire-rated steel doors in Bridgnorth?

Yes. We supply fire-resisting steel doorsets with the manufacturer's test evidence for the rating your fire strategy needs, and install them strictly to the manufacturer's instructions, including seals, gaps and approved hardware.

Do you repair fire exit doors across Shropshire?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Shropshire. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

How much is a steel personnel door in Bridgnorth?

Our guide price is £845 to £1,795 ex VAT for a single steel personnel door, or £1,095 to £2,395 for a steel fire exit door with panic hardware, supplied and fitted. We confirm the fixed price for your Bridgnorth premises in writing after a free survey.

Steel personnel and fire exit doors near Bridgnorth

Working in Bridgnorth? We also take on jobs in Telford, Wellington, Kidderminster and across Shropshire.

Other services in Bridgnorth

More about Steel personnel and fire exit doors · industrial doors in Bridgnorth. Last updated 19 October 2026.