Steel personnel and fire exit doors in Oswestry

The short version

Steel personnel doors and fire exit doors for warehouses, factories, plant rooms and trade units in Oswestry. We survey each opening, specify the right hardware and rating, then supply and fit a complete steel doorset.

Town: Oswestry
Postcode district: SY11
Area: Shropshire
Survey: Free for new installations

What we fit in Oswestry

Fire-rated doorsets. Where a door must hold back fire, we supply tested fire-rated doorsets and fit them exactly as specified.
Louvres and vision. Louvred leaves for plant rooms and vision panels where visibility helps.
Outside access. Key or code access from outside while the exit stays free from inside.
Panic hardware. Where visitors or the public might need to escape, we fit full-width panic bars to BS EN 1125.
Security options. From hinge bolts to certified security doorsets, the door can be specified to resist attack.

Typical scopes of work

Replacing seized BS EN 179 push pads on staff-only exits in a factory or production building.
Supplying 60-minute fire-resisting steel doorsets for the compartment walls set out in a building's fire strategy.
Changing worn panic bars on fire exits and adjusting the overhead closers so each door latches properly.

Door rules for workplaces in England

Doors in Oswestry workplaces are covered by regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992: a door that can be pushed open from either side must give, when closed, a clear view of the space close to both sides, which is why swing doors on traffic routes have vision panels. Under the Regulatory Reform (Fire Safety) Order 2005, emergency exit doors must open easily and immediately in the direction of escape.

Access, phasing and timing

Most installations in Oswestry can be phased so part of the site keeps working. We agree access routes, exclusion zones and any temporary security with you before the team arrives, and can work early mornings, evenings or weekends where the business needs it.

Guide prices for steel personnel and fire exit doors

Steel personnel and fire exit doors guide prices
Item	Guide price (ex VAT)
Steel personnel door, single	£845 – £1,795
Steel fire exit door with panic hardware	£1,095 – £2,395
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Oswestry

How long does it take to replace a steel door in Oswestry?

Most single steel doorsets are fitted in a day, including removal of the old door, fixing the new frame and making good. Made-to-measure doorsets have a manufacturing lead time, which we confirm with the quote.

Do you repair fire exit doors across Shropshire?

Yes. We repair and replace panic bars, emergency devices, closers, hinges and locks on steel doors across Shropshire. Repair visits are chargeable, and on fire-rated doors we only fit hardware covered by the door's test evidence.

How much is a steel personnel door in Oswestry?

Our guide price is £845 to £1,795 ex VAT for a single steel personnel door, or £1,095 to £2,395 for a steel fire exit door with panic hardware, supplied and fitted. We confirm the fixed price for your Oswestry premises in writing after a free survey.

Steel personnel and fire exit doors near Oswestry

Besides Oswestry, we can survey and quote for sites in Shrewsbury, Chester, Wellington and the rest of Shropshire.

Other services in Oswestry

More about Steel personnel and fire exit doors · industrial doors in Oswestry. Last updated 19 October 2026.