Industrial door motor replacement in Coalville

At a glance

Replacing a door motor at a site in Coalville is a chance to upgrade the control panel too, adding inverter control, remotes, loops or traffic lights at the same time.

Town: Coalville
Postcode district: LE67
Area: Leicestershire
Guide price: £845 – £2,395

What our engineers check and fix

Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
Obsolete motors. Equivalent drives with adapters where the original model is no longer made.
Brake and override. Brakes tested and manual override checked on every change.
Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.

Jobs we can carry out

Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.
Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.

Powered door rules that apply in Coalville

Coalville is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

On a first visit we record each door's make, size, control type and condition. That record makes later repairs quicker to price and helps you plan replacements before a door fails.

Budgeting for industrial door motor replacement in Coalville

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Industrial door motor replacement in Coalville: your questions

Is the motor really the problem with our door in Coalville?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Should we replace the whole door instead of the motor in Coalville?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

How much does an industrial door motor replacement cost in Coalville?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Coalville costs £145 to £195 ex VAT.

Industrial door motor replacement near Coalville

Working in Coalville? We also take on jobs in Loughborough, Swadlincote, Leicester and across Leicestershire.

Other services in Coalville

More about Industrial door motor replacement · industrial doors in Coalville. Last updated 19 October 2026.