Industrial door motor replacement in Long Eaton

In short

Motor replacement in Long Eaton starts with a chargeable diagnostic visit, then a written fixed price for the new drive and any other repairs the door needs before it goes back into use.

Town: Long Eaton
Postcode district: NG10
Area: Derbyshire
Guide price: £845 – £2,395

What our engineers check and fix

Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
Written records. You receive written details of the new drive and test results for your records.
Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.
Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.

Typical scopes of work

Changing a tubular motor in a small service shutter that overheats and trips during busy periods.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.

Who is responsible for door safety at a site in Long Eaton?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Prices for industrial door motor replacement in Long Eaton

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Frequently asked questions

Is the motor really the problem with our door in Long Eaton?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

How much does an industrial door motor replacement cost in Long Eaton?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Long Eaton costs £145 to £195 ex VAT.

Should we replace the whole door instead of the motor in Long Eaton?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Industrial door motor replacement near Long Eaton

Long Eaton is in the NG10 postcode district in Derbyshire. We also cover Ilkeston, Nottingham, West Bridgford.

Other services in Long Eaton

More about Industrial door motor replacement · industrial doors in Long Eaton. Last updated 19 October 2026.