Quick answer
Insulated roller shutter doors for heated workshops, trade units and vehicle bays in Long Eaton. We survey the opening, check there is headroom for the coil and fit an electric door that keeps the warmth in and the weather out.
- Town
- Long Eaton
- Postcode district
- NG10
- Area
- Derbyshire
- Survey
- Free for new installations
What to specify
- Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.
- Electric drive. Motor inside the barrel or on its end, with a chain or handle so the door still opens without power.
- Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
- Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
- Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
What this work can involve
- Installing an insulated roller door with induction loop activation on a busy internal forklift route.
- Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
- Supplying insulated roller doors in one matching RAL colour across a terrace of refurbished small business units.
Who is responsible for door safety at a site in Long Eaton?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
How the work is organised
If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.
Guide prices for insulated roller shutter doors
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Long Eaton
How long does insulated roller door installation take in Long Eaton?
Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.
Will an insulated roller door cut heating bills at our Long Eaton premises?
It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.
Do you repair insulated roller doors across Derbyshire?
Yes. We repair damaged laths, motors, guides and seals on most makes of insulated roller door across Derbyshire. Repair visits are chargeable, and planned servicing helps catch wear before a breakdown.
Insulated roller shutter doors near Long Eaton
Long Eaton is in the NG10 postcode district in Derbyshire. We also cover Ilkeston, Nottingham, West Bridgford.
- Insulated roller shutter doors in Ilkeston
- Insulated roller shutter doors in Nottingham
- Insulated roller shutter doors in West Bridgford
- Insulated roller shutter doors in Heanor
- Insulated roller shutter doors in Derby
- Insulated roller shutter doors in Arnold
Other services in Long Eaton
- Dock levellers
- Dock shelters and seals
- Industrial door motor replacement
- Complete loading bays
- Steel personnel and fire exit doors
- Impact traffic doors
- Hangar and large-span doors
- Door automation and controls
More about Insulated roller shutter doors · industrial doors in Long Eaton. Last updated 19 October 2026.