The short version
We can fit foam-filled insulated roller doors in Leicestershire and across the East Midlands, from small service doors to wide goods openings, with the drive, seals and controls chosen for how each door is actually used.
- Area
- Leicestershire
- Nation
- England
- Main town
- Leicester
- Survey
- Free for new installations
What we fit in Leicestershire
- Weather seals. Brush or rubber guide seals and a rubber bottom seal against draughts and rain.
- Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.
- Wind locks. On exposed elevations, wind locks hook the laths into the guides so gusts cannot push the curtain out.
- Colour choice. Powder-coated RAL finishes to match cladding and building trims.
- Electric drive. Motor inside the barrel or on its end, with a chain or handle so the door still opens without power.
Typical scopes of work
- Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
- Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
- Installing an insulated roller door with induction loop activation on a busy internal forklift route.
Safety law for industrial doors in England
Industrial doors in Leicestershire are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Planning the work around your site
Sites in and around Leicestershire vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about insulated roller shutter doors
Can you replace our old roller shutter in Leicestershire with an insulated one?
Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.
How much does an insulated roller shutter door cost in Leicestershire?
Our guide price for an electric insulated roller door up to about 4 × 4 m is £3,195 to £7,495 ex VAT, supplied and fitted. We survey your Leicestershire opening free of charge and then put a fixed price in writing.
How long does insulated roller door installation take in Leicestershire?
Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.
Towns in Leicestershire we cover
We cover 8 towns in Leicestershire for insulated roller shutter doors, including Leicester, Loughborough, Hinckley, Coalville.
Other services in Leicestershire
- High-speed doors
- Industrial door installation
- Industrial door motor replacement
- Industrial door repairs
- Door safety upgrades
- PVC strip curtains
- Cold store and freezer doors
- Impact traffic doors
More about Insulated roller shutter doors. Last updated 19 October 2026.