Insulated roller shutter doors in Market Harborough

Quick answer

Tight headroom, cluttered ceiling, still need a warm door? For units in Market Harborough (LE16), we can install insulated roller doors that coil neatly above the opening and leave the roof space completely clear.

Town: Market Harborough
Postcode district: LE16
Area: Leicestershire
Survey: Free for new installations

What to specify

Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Controls. Buttons, key switches, remotes, induction loops or radar to suit your traffic.
Electric drive. Tubular or external geared motors with a manual override for power cuts.
Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
Compact coil. The curtain coils above the opening, leaving ceilings free for lights and sprinklers.

What this work can involve

Fitting an insulated roller door to a trade counter unit where sprinkler mains leave no room for sectional door tracks.
Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.

Safety law for industrial doors in England

Industrial doors in Market Harborough are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Access, phasing and timing

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Guide prices

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Market Harborough

Does a powered insulated roller door in Market Harborough need safety devices?

If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.

Will an insulated roller door cut heating bills at our Market Harborough premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

Can you replace our old roller shutter in Market Harborough with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Insulated roller shutter doors near Market Harborough

Our teams cover Market Harborough (LE16) and nearby Corby, Kettering, Wigston, along with the rest of Leicestershire.

Other services in Market Harborough

More about Insulated roller shutter doors · industrial doors in Market Harborough. Last updated 19 October 2026.