Sectional overhead doors in Market Harborough

At a glance

Sectional overhead doors for warehouses, workshops and loading bays in Market Harborough. We survey the opening, specify the panels, tracks and drive to suit how the door is used, then install and commission it with full handover paperwork.

Town: Market Harborough
Postcode district: LE16
Area: Leicestershire
Survey: Free for new installations

Options that matter on site

Wicket doors. A pass door built into the panels saves opening the whole door for pedestrians; low-threshold options reduce trips.
Insulated panels. 40 mm PU-insulated steel panels as standard, with thicker thermal panels where heat loss matters.
Paperwork. Declaration of Performance, user instructions and commissioning records handed over on completion.
Finishes. Choose a colour to match your building and a stucco or ribbed finish that hides minor knocks.
Track layouts. Standard, low headroom, high lift and vertical lift tracks, chosen after measuring your headroom.

Typical scopes of work

Converting a manual chain-operated sectional door to electric operation with a shaft-mounted motor, safety edge and photocells.
Fitting a bank of insulated sectional doors to a new distribution unit, with high-lift tracks to clear sprinkler mains and lighting.
Installing a sectional door on low-headroom tracks in a steel-framed unit where the roof haunch sits close above the opening.

Safety law for industrial doors in England

Industrial doors in Market Harborough are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Keeping your site running during the work

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Prices for sectional overhead doors in Market Harborough

Sectional overhead doors guide prices
Item	Guide price (ex VAT)
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about sectional overhead doors

Do you service sectional doors in Leicestershire?

Yes. We service and repair most makes of sectional door across Leicestershire, including spring and cable replacement, panel repairs, motor changes and safety checks, and can set up a planned maintenance schedule.

Can you replace a roller shutter with a sectional door at our Market Harborough unit?

Usually, yes, provided there is enough headroom and side room for the tracks. Low-headroom track kits cover many older units. We check this on the survey and include strip-out and making good in the quote.

How much is a sectional overhead door in Market Harborough?

Our guide price for an electric, 40 mm insulated sectional door up to about 4 × 4.5 m is £3,495 to £8,495 ex VAT, supplied and fitted. The fixed price for your opening in Market Harborough is confirmed in writing after a free survey.

Sectional overhead doors near Market Harborough

Market Harborough is in the LE16 postcode district in Leicestershire. We also cover Corby, Kettering, Wigston.

Other services in Market Harborough

More about Sectional overhead doors · industrial doors in Market Harborough. Last updated 19 October 2026.