In short
Door safety upgrades for powered roller shutters, sectional doors and sliding doors in Market Harborough. We force-test the door, assess how it is used and fit the safety edges, photocells or light curtains it needs.
- Town
- Market Harborough
- Postcode district
- LE16
- Area
- Leicestershire
- Survey
- Free for new installations
Options that matter on site
- Fall protection. Spring-break, cable-break and anti-fall devices against suspension failure.
- Warning devices. Lights and sounders make sure people know when a door is about to move.
- Safety edges. Pressure-sensitive or optical edges that stop and reverse the door on contact.
- Force testing. Closing forces measured against BS EN 12453 limits and recorded.
- Panel upgrades. Where the old panel cannot monitor devices, we replace it with one that can.
Typical scopes of work
- Force-testing a run of loading bay doors and adjusting closing speeds where results exceed the limits.
- Fitting spring-break and cable-break devices to older sectional doors installed without any fall protection.
- Adding anti-fall devices to heavy roller shutters identified in a workplace risk assessment review.
Safety law for industrial doors in England
Industrial doors in Market Harborough are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Planning the work around your site
If your premises are leased, check whether the landlord needs to approve the work. We can provide drawings and product data for the landlord or managing agent before the order is placed.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
| Repair visit (attendance and first hour) | £145 – £195 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Frequently asked questions
Can you force-test our doors in Market Harborough?
Yes. We measure closing forces with a calibrated tester at the points set out in BS EN 12453, record the results and recommend any adjustments or devices needed. Force testing can be part of a service visit.
How long does a safety upgrade take in Market Harborough?
Most upgrades take a few hours per door, including re-testing. If a new control panel is needed, it may take longer. We plan work to keep doors out of use for as short a time as possible.
How much does a door safety upgrade cost in Market Harborough?
Our guide price is £445 to £1,795 ex VAT per door for safety edges, photocells or a light curtain, depending on door size and devices. A new control panel or fall protection adds to it. We confirm the fixed price after a survey and force test in Market Harborough.
Door safety upgrades near Market Harborough
Besides Market Harborough, we can survey and quote for sites in Corby, Kettering, Wigston and the rest of Leicestershire.
- Door safety upgrades in Corby
- Door safety upgrades in Kettering
- Door safety upgrades in Wigston
- Door safety upgrades in Oadby
- Door safety upgrades in Uppingham
- Door safety upgrades in Leicester
Other services in Market Harborough
- Dock leveller and loading bay repairs
- Sectional overhead doors
- Dock shelters and seals
- Steel personnel and fire exit doors
- Planned maintenance contracts
- Industrial door replacement
- Bollards and door protection
- Complete loading bays
More about Door safety upgrades · industrial doors in Market Harborough. Last updated 19 October 2026.