The short version
Replacing a draughty roller shutter in Rutland? We remove the old door, fit an insulated curtain with new guides, seals and motor, and hand over a tested, commissioned door with all of its paperwork.
- Area
- Rutland
- Nation
- England
- Main town
- Oakham
- Survey
- Free for new installations
What to specify
- Controls. From a simple button station to loops and radar, the controls match how often the door opens.
- Colour choice. Choose a colour to suit your building, with a matching hood over the coil if wanted.
- Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
- Safety devices. Safety edges, photocells and anti-fall devices fitted as the risk assessment requires.
- Foam-filled laths. Double-skin laths with a polyurethane core cut heat loss compared with single skin.
Jobs we can carry out
- Fitting an insulated roller door to a trade counter unit where sprinkler mains leave no room for sectional door tracks.
- Supplying insulated roller doors in one matching RAL colour across a terrace of refurbished small business units.
- Replacing a corroded single-skin shutter on a heated workshop with an insulated roller door and radio remote control.
Who is responsible for door safety at a site in Rutland?
In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.
Planning the work around your site
Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.
Prices for insulated roller shutter doors in Rutland
| Item | Guide price (ex VAT) |
|---|---|
| Insulated roller door, electric (to c. 4 × 4 m) | £3,195 – £7,495 |
| Strip-out and disposal on replacement | £345 – £1,195 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Questions from businesses in Rutland
Does a powered insulated roller door in Rutland need safety devices?
If the door closes automatically or can trap someone, yes. The risk assessment decides what is needed, typically a safety edge, photocells and closing forces tested to BS EN 12453, plus anti-fall protection on heavier curtains.
How long does insulated roller door installation take in Rutland?
Most single doors are fitted and commissioned in a day once the made-to-measure door has arrived. The manufacturer's lead time is confirmed with your quote so you can plan around it.
Will an insulated roller door cut heating bills at our Rutland premises?
It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.
Towns in Rutland we cover
We cover 3 towns in Rutland for insulated roller shutter doors, including Oakham, Uppingham, Ketton.
Other services in Rutland
- Industrial door motor replacement
- Fire shutters
- Impact traffic doors
- Industrial door installation
- Sectional overhead doors
- Industrial roller shutters
- High-speed doors
- Fire shutter servicing and drop tests
More about Insulated roller shutter doors. Last updated 19 October 2026.