Insulated roller shutter doors in Nottingham

In short

If your unit in Nottingham loses heat through an old single-skin shutter, an insulated roller door is often the simplest fix. You get a free survey, a written fixed price and full commissioning on completion.

Town: Nottingham
Postcode district: NG1
Area: Nottinghamshire
Survey: Free for new installations

What we fit in Nottingham

Compact coil. No tracks under the roof: the door rolls up into a neat coil above the lintel.
Foam-filled laths. Each lath has two metal skins with insulating foam between them, so the curtain holds heat far better.
Weather seals. Seals along the guides, head and bottom rail stop wind-driven rain and cold air getting in.
Wind locks. Lath end locks for exposed or wide doors to stop the curtain blowing out.
Safety devices. Every powered door gets the safety functions its risk assessment calls for and is tested before handover.

Jobs we can carry out

Fitting a compact insulated service door to a plant room to reduce the noise reaching neighbouring offices.
Renewing worn guide brushes, the head seal and the bottom-rail seal on an insulated roller door that lets in draughts.
Converting a hand-chained insulated roller door to electric operation with a safety edge and photocells.

Who is responsible for door safety at a site in Nottingham?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Prices for insulated roller shutter doors in Nottingham

Insulated roller shutter doors guide prices
Item	Guide price (ex VAT)
Insulated roller door, electric (to c. 4 × 4 m)	£3,195 – £7,495
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Nottingham

Will an insulated roller door cut heating bills at our Nottingham premises?

It loses much less heat than a single-skin shutter, especially with good seals and quick electric operation. How much you save depends on your building, heating system and how long the door stays open.

Is there enough headroom for an insulated roller door at our Nottingham unit?

The coil on an insulated curtain is larger than on a single-skin shutter, so we measure the space above the lintel on survey. Where headroom is very tight, the coil can sometimes be fitted outside the opening or a lower-profile option chosen.

Can you replace our old roller shutter in Nottingham with an insulated one?

Yes. We recommend a complete new door rather than a new curtain on old parts, and include strip-out and disposal in the quote so the old shutter goes when the new one is fitted.

Insulated roller shutter doors near Nottingham

Besides Nottingham, we can survey and quote for sites in West Bridgford, Arnold, Hucknall and the rest of Nottinghamshire.

Other services in Nottingham

More about Insulated roller shutter doors · industrial doors in Nottingham. Last updated 19 October 2026.