Industrial door installation in Long Eaton

Quick answer

Whether you need one roller shutter or a run of loading bay doors, we can install industrial doors in Long Eaton and across Derbyshire, starting with a free survey and a written fixed price.

Town: Long Eaton
Postcode district: NG10
Area: Derbyshire
Survey: Free for new installations

What to specify

Safety set-up. Each motorised door gets the safety devices its risk assessment calls for and is force-tested before use.
Conformity paperwork. Handover includes the product and machinery conformity documents plus commissioning records.
Drives and controls. Direct, centre or chain drive motors with buttons, remotes, loops, radar or interlocks.
Free survey. Opening, headroom, obstructions, fixings and power all measured before we quote.
Loading equipment. The door, leveller, shelter and impact protection are specified together so the whole bay works as one.

Jobs we can carry out

Fitting a freezer door with heated frame and inside release to a new cold room within a food production unit.
Fitting sectional doors, a high-speed internal door and steel personnel doors to a new-build warehouse as one coordinated package.
Replacing corroded roller shutters on a vehicle workshop with insulated roller doors and new key-switch controls.

Who is responsible for door safety at a site in Long Eaton?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices

Industrial door installation guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
High-speed fabric door	£7,495 – £15,995

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Long Eaton

Who signs off a new powered door at our Long Eaton site?

When we assemble or motorise a door, we take on the manufacturer's role under machinery law: risk assessment, testing, conformity marking and the Declaration of Conformity. You then keep the door maintained as the employer or occupier.

How soon could a new door be installed at our Long Eaton premises?

It depends mainly on the manufacturer's lead time for a made-to-measure door, which we confirm in the quote. Installation is then booked around your operations, and most single doors are fitted and commissioned in a day.

How much does industrial door installation cost in Long Eaton?

Guide prices, ex VAT and supplied and fitted, start at £2,395 to £5,495 for an electric single-skin roller shutter up to about 4 × 4 m, or £3,495 to £8,495 for an insulated sectional door. Your fixed price in Long Eaton is confirmed in writing after a free survey.

Industrial door installation near Long Eaton

Working in Long Eaton? We also take on jobs in Ilkeston, Nottingham, West Bridgford and across Derbyshire.

Other services in Long Eaton

More about Industrial door installation · industrial doors in Long Eaton. Last updated 19 October 2026.