Industrial door installation in Derby

The short version

New unit, tired shutter or a door that no longer suits the way you work? We supply and fit roller, sectional, high-speed, fire and sliding doors at premises in Derby (DE1).

Town: Derby
Postcode district: DE1
Area: Derbyshire
Survey: Free for new installations

Options that matter on site

Free survey. We measure and inspect the opening first, so the price reflects your building rather than a guess.
Drives and controls. Motors sized to the door and controls matched to your traffic, from a key switch to induction loops.
Aftercare. Planned maintenance and repairs available for the doors we fit and most other makes.
Safety set-up. Each motorised door gets the safety devices its risk assessment calls for and is force-tested before use.
Conformity paperwork. Declaration of Performance, Declaration of Conformity and user instructions on handover.

Typical scopes of work

Supplying a bottom-rolling sliding door for a wide opening where there is no headroom for a coiled or tracked door.
Adding a high-speed fabric door inside an existing shutter so the main door can stay open through the working day.
Replacing corroded roller shutters on a vehicle workshop with insulated roller doors and new key-switch controls.

Who is responsible for door safety at a site in Derby?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Electrical work is the part that most often delays a job. If a new or converted door needs a supply, we confirm the motor's requirement at quote stage so your electrician can provide an isolator in the right place before installation day.

Budgeting for industrial door installation in Derby

Industrial door installation guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Sectional overhead door, 40 mm insulated, electric (to c. 4 × 4.5 m)	£3,495 – £8,495
High-speed fabric door	£7,495 – £15,995

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial door installation

Do you service and repair industrial doors across Derbyshire?

Yes. We repair and maintain the doors we install and most other makes across Derbyshire. Repair and service visits are chargeable, and a planned maintenance schedule can be set up once the new door is in.

How much does industrial door installation cost in Derby?

Guide prices, ex VAT and supplied and fitted, start at £2,395 to £5,495 for an electric single-skin roller shutter up to about 4 × 4 m, or £3,495 to £8,495 for an insulated sectional door. Your fixed price in Derby is confirmed in writing after a free survey.

Is the survey free for sites in Derby?

Yes, for new installations and replacements. We measure the opening and the space around it, check fixings, power and obstructions, and talk through how the door is used before preparing a written quote. Repair and service visits are charged separately.

Industrial door installation near Derby

Working in Derby? We also take on jobs in Belper, Ilkeston, Heanor and across Derbyshire.

Other services in Derby

More about Industrial door installation · industrial doors in Derby. Last updated 19 October 2026.