Industrial door motor replacement in Arnold

At a glance

We can replace failed and obsolete door motors in Arnold and across Nottinghamshire, from tubular motors in small service shutters to heavy-duty chain drives on large, heavy sectional and sliding doors.

Town: Arnold
Postcode district: NG5
Area: Nottinghamshire
Guide price: £845 – £2,395

What the visit covers in Arnold

Written records. A record of the work and tests for your maintenance file.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Brake and override. Brakes tested and manual override checked on every change.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.

Examples of work we can quote for

Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.

Powered door rules that apply in Arnold

Arnold is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Prices for industrial door motor replacement in Arnold

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Industrial door motor replacement in Arnold: your questions

How much does an industrial door motor replacement cost in Arnold?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Arnold costs £145 to £195 ex VAT.

Is the motor really the problem with our door in Arnold?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Can you replace an obsolete door motor in Arnold?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Industrial door motor replacement near Arnold

Besides Arnold, we can survey and quote for sites in Nottingham, Hucknall, West Bridgford and the rest of Nottinghamshire.

Other services in Arnold

More about Industrial door motor replacement · industrial doors in Arnold. Last updated 19 October 2026.