Industrial door motor replacement in Loughborough

At a glance

Replacing a door motor at a site in Loughborough is a chance to upgrade the control panel too, adding inverter control, remotes, loops or traffic lights at the same time.

Town: Loughborough
Postcode district: LE11
Area: Leicestershire
Guide price: £845 – £2,395

What the visit covers in Loughborough

Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Obsolete motors. Equivalent drives with adapters where the original model is no longer made.
Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.

Typical scopes of work

Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.

Powered door rules that apply in Loughborough

Loughborough is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

How the work is organised

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Guide prices

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Your questions about industrial door motor replacement

Can you replace an obsolete door motor in Loughborough?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Is the motor really the problem with our door in Loughborough?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Should we replace the whole door instead of the motor in Loughborough?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Industrial door motor replacement near Loughborough

Working in Loughborough? We also take on jobs in Coalville, Leicester, Long Eaton and across Leicestershire.

Other services in Loughborough

More about Industrial door motor replacement · industrial doors in Loughborough. Last updated 19 October 2026.