At a glance
Temperature-controlled rooms in Buxton (SK17) need doors that seal tightly, open safely from inside and stand up to forklift traffic. We specify, fit and commission them with full handover records.
- Town
- Buxton
- Postcode district
- SK17
- Area
- Derbyshire
- Survey
- Free for new installations
Options for cold store and freezer doors in Buxton
- Pressure relief. Relief valves to balance pressure after the door closes or during defrost.
- Thick insulation. Insulation thickness is chosen for your operating temperature, with heavier leaves for freezers.
- Tight seals. The leaf pulls in against its gaskets on closing so cold air stays where it belongs.
- Heated frames. Freezer frames and thresholds are kept just warm enough that ice cannot form on the seals.
- Hygienic finishes. Plastisol-coated steel, stainless steel or GRP for food and pharmaceutical use.
What this work can involve
- Motorising a heavy manual cold store door with pull-cord activation, a safety edge on the closing leaf and photocells.
- Adding a heated pressure relief valve to a freezer room where suction makes the door hard to open once it closes.
- Replacing an iced-up sliding freezer door with a new insulated door, heated frame and heated threshold.
Powered door rules that apply in Buxton
Buxton is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.
Access, phasing and timing
Downtime matters on a working site, so the programme is set around your shifts. For a single door the opening is usually needed for a day; multi-door jobs are done one bay at a time so deliveries keep moving.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Cold store / freezer door (sliding) | £6,495 – £17,995 |
| High-speed fabric door | £7,495 – £15,995 |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Cold store and freezer doors in Buxton: your questions
Why is our cold room door in Buxton hard to open after it closes?
Usually negative pressure: air inside cools and contracts once the door seals. A correctly sized pressure relief valve, heated on freezers, solves this. We check for one on survey and can fit it with a new door.
How much does a cold store or freezer door cost in Buxton?
Our guide price for a sliding cold store or freezer door is £6,495 to £17,995 ex VAT, supplied and fitted. Size, temperature, insulation and electric operation set the final price, confirmed in writing after a free survey in Buxton.
What safety release do cold store doors in Buxton need?
Every cold store door should open from inside without a key or tool, even when locked from outside. We fit a clearly marked inside release and can add an alarm button connected to a monitored panel.
Cold store and freezer doors near Buxton
Buxton is in the SK17 postcode district in Derbyshire. We also cover Macclesfield, Congleton, Wilmslow.
- Cold store and freezer doors in Macclesfield
- Cold store and freezer doors in Congleton
- Cold store and freezer doors in Wilmslow
- Cold store and freezer doors in Stockport
- Cold store and freezer doors in Hyde
- Cold store and freezer doors in Denton
Other services in Buxton
- Hangar and large-span doors
- Industrial door repairs
- Complete loading bays
- Industrial door installation
- Industrial door replacement
- Dock leveller and loading bay repairs
- Dock levellers
- Dock shelters and seals
More about Cold store and freezer doors · industrial doors in Buxton. Last updated 19 October 2026.