Door automation and controls in Ammanford

In short

Busy door at your Ammanford (SA18) site? Inverter control, induction loops or radar can open it as traffic arrives and close it straight after, with photocells and safety edges watching the opening.

Town: Ammanford
Postcode district: SA18
Area: Dyfed
Survey: Free for new installations

Options for door automation and controls in Ammanford

Activation options. Choose how the door is opened, from staff buttons to automatic vehicle detection.
Inverter drives. Soft start and stop with faster opening for high-cycle doors.
Matched motors. Direct, centre-mounted, chain-drive or tubular motors sized to the door.
Manual override. A manual means of opening is always kept, so the door is never stuck shut without power.
Manual-to-electric. Hand-operated doors converted to power, with the paperwork a powered door needs.

Typical scopes of work

Installing an airlock interlock between two high-speed doors so only one can be open at a time.
Adding traffic lights and warning beacons to a yard door shared by lorries and pedestrians.
Fitting a centre-mounted motor to a roller shutter where a side wall leaves no room at the barrel end.

Who is responsible for door safety at a site in Ammanford?

In Wales, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Sites in and around Ammanford vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Prices for door automation and controls in Ammanford

Door automation and controls guide prices
Item	Guide price (ex VAT)
Manual-to-electric conversion	£1,195 – £3,195
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Frequently asked questions

How long does a door automation job take in Ammanford?

A straightforward conversion is usually completed and commissioned in a day. Loops, interlocks and traffic lights add time, and we plan the work so the door is out of use for as little time as possible.

Do you take responsibility for the conformity paperwork in Ammanford?

Yes. When we convert a door to power, we carry out the risk assessment, test the door and issue the Declaration of Conformity and user instructions, as the person who has made it a machine.

Which activation would suit our Ammanford site?

It depends on who uses the door. Buttons suit staff, remotes suit drivers, pull cords and loops suit forklifts, and radar suits mixed traffic. We look at your traffic on survey and recommend a set-up.

Door automation and controls near Ammanford

Besides Ammanford, we can survey and quote for sites in Gorseinon, Ystradgynlais, Llanelli and the rest of Dyfed.

Other services in Ammanford

More about Door automation and controls · industrial doors in Ammanford. Last updated 19 October 2026.