The short version
Busy door at your Pontypool (NP4) site? Inverter control, induction loops or radar can open it as traffic arrives and close it straight after, with photocells and safety edges watching the opening.
- Town
- Pontypool
- Postcode district
- NP4
- Area
- Gwent
- Survey
- Free for new installations
Options that matter on site
- Traffic lights. Red and green lights and warning beacons for drivers.
- Manual override. Chain or crank override so doors open during power cuts.
- Manual-to-electric. Conversions for sectional, roller and sliding doors in good order.
- Activation options. Choose how the door is opened, from staff buttons to automatic vehicle detection.
- Matched motors. Direct, centre-mounted, chain-drive or tubular motors sized to the door.
Typical scopes of work
- Replacing an obsolete control panel with a modern unit, then re-testing the safety devices and closing forces.
- Fitting a centre-mounted motor to a roller shutter where a side wall leaves no room at the barrel end.
- Adding radar with cross-traffic suppression to a door on a busy aisle so passing trucks do not open it.
Safety law for industrial doors in Wales
Industrial doors in Pontypool are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.
Access, phasing and timing
Sites in and around Pontypool vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.
Guide prices
| Item | Guide price (ex VAT) |
|---|---|
| Manual-to-electric conversion | £1,195 – £3,195 |
| Safety upgrade (edges, photocells, light curtain) | £445 – £1,795 per door |
Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.
Your questions about door automation and controls
Do you take responsibility for the conformity paperwork in Pontypool?
Yes. When we convert a door to power, we carry out the risk assessment, test the door and issue the Declaration of Conformity and user instructions, as the person who has made it a machine.
How much does it cost to make a door electric in Pontypool?
Our guide price for a manual-to-electric conversion is £1,195 to £3,195 ex VAT, including motor, control panel, basic controls and commissioning. Extra controls and safety devices are priced separately, and your fixed price in Pontypool follows a free survey.
How long does a door automation job take in Pontypool?
A straightforward conversion is usually completed and commissioned in a day. Loops, interlocks and traffic lights add time, and we plan the work so the door is out of use for as little time as possible.
Door automation and controls near Pontypool
Besides Pontypool, we can survey and quote for sites in Cwmbran, Risca, Newport (Gwent) and the rest of Gwent.
- Door automation and controls in Cwmbran
- Door automation and controls in Risca
- Door automation and controls in Newport (Gwent)
- Door automation and controls in Abergavenny
- Door automation and controls in Ebbw Vale
- Door automation and controls in Caerphilly
Other services in Pontypool
- PVC strip curtains
- High-speed doors
- Complete loading bays
- Sliding and folding industrial doors
- Bollards and door protection
- Impact traffic doors
- Dock shelters and seals
- Steel personnel and fire exit doors
More about Door automation and controls · industrial doors in Pontypool. Last updated 19 October 2026.