Door automation and controls in Ipswich

At a glance

Door automation for warehouses, workshops and loading bays in Ipswich. We convert manual doors to electric, fit motors and control panels, and add loops, radar, remotes and interlocks to suit how each door is used.

Town: Ipswich
Postcode district: IP1
Area: Suffolk
Survey: Free for new installations

What we fit in Ipswich

Interlocks. Doors linked to each other, to levellers or to the alarm so they work in the right sequence.
Manual override. Chain or crank override so doors open during power cuts.
Activation options. Buttons, key switches, remotes, pull cords, loops, radar and access control.
Safety devices. Safety edges, photocells and light curtains, force-tested to BS EN 12453.
Inverter drives. Soft start and stop with faster opening for high-cycle doors.

What this work can involve

Fitting induction loops and an inverter control panel so forklifts can open a busy internal door without stopping.
Adding radar with cross-traffic suppression to a door on a busy aisle so passing trucks do not open it.
Replacing an obsolete control panel with a modern unit, then re-testing the safety devices and closing forces.

Who is responsible for door safety at a site in Ipswich?

In England, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Sites in and around Ipswich vary from tight trade counters to large distribution yards. The survey records access for our vehicle and platform, overhead obstructions and floor condition so the installation day runs without surprises.

Prices for door automation and controls in Ipswich

Door automation and controls guide prices
Item	Guide price (ex VAT)
Manual-to-electric conversion	£1,195 – £3,195
Safety upgrade (edges, photocells, light curtain)	£445 – £1,795 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about door automation and controls

Can our door in Ipswich be automated?

If the door is in good mechanical order and a suitable motor is available, usually yes. We check balance, springs, cables, guides and the curtain or panels on survey, and recommend repair or replacement first if needed.

Do you take responsibility for the conformity paperwork in Ipswich?

Yes. When we convert a door to power, we carry out the risk assessment, test the door and issue the Declaration of Conformity and user instructions, as the person who has made it a machine.

Can you add interlocks or traffic lights to doors around Suffolk?

Yes. We fit airlock interlocks, door-to-leveller interlocks, traffic lights and warning beacons to new and existing doors across Suffolk, subject to compatibility with the control panels already fitted, and replace panels where they cannot accept the extra inputs.

Door automation and controls near Ipswich

Ipswich is in the IP1 postcode district in Suffolk. We also cover Harwich, Felixstowe, Stowmarket.

Other services in Ipswich

More about Door automation and controls · industrial doors in Ipswich. Last updated 19 October 2026.