Industrial door motor replacement in Fishponds

The short version

Motor replacement in Fishponds starts with a chargeable diagnostic visit, then a written fixed price for the new drive and any other repairs the door needs before it goes back into use.

Town: Fishponds
Postcode district: BS16
Area: Bristol
Guide price: £845 – £2,395

What our engineers check and fix

Written records. A record of the work and tests for your maintenance file.
Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.

Typical scopes of work

Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.

Safety law for industrial doors in England

Industrial doors in Fishponds are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

How the work is organised

Service and repair visits in Fishponds are booked around your shifts. Doors and shutters are taken out of use one at a time, so the rest of the site keeps working while each one is checked.

Guide prices

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Frequently asked questions

Will our door in Fishponds be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Is the motor really the problem with our door in Fishponds?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

How much does an industrial door motor replacement cost in Fishponds?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Fishponds costs £145 to £195 ex VAT.

Industrial door motor replacement near Fishponds

Our teams cover Fishponds (BS16) and nearby Kingswood, Brislington, Bristol, along with the rest of Bristol.

Other services in Fishponds

More about Industrial door motor replacement · industrial doors in Fishponds. Last updated 19 October 2026.