Industrial door motor replacement in Llandudno

Quick answer

Door stalling, grinding or creeping down at your Llandudno site? It may need a new motor, or the motor may be suffering from a fault elsewhere. We diagnose which it is before recommending anything.

Town: Llandudno
Postcode district: LL30
Area: Clwyd
Guide price: £845 – £2,395

What's included

Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Matched drives. Motor torque, speed and mounting matched to the door's weight and size.
Brake and override. Brakes tested and manual override checked on every change.
Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.

Examples of work we can quote for

Changing a tubular motor in a small service shutter that overheats and trips during busy periods.
Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.

Who is responsible for door safety at a site in Llandudno?

In Wales, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Before work starts we send a method statement and risk assessment, confirm who on site will be our contact and agree where materials and access equipment will go. On shared industrial estates that can mean booking yard space with the landlord.

Guide prices for industrial door motor replacement

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Questions from businesses in Llandudno

Should we replace the whole door instead of the motor in Llandudno?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

How much does an industrial door motor replacement cost in Llandudno?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Llandudno costs £145 to £195 ex VAT.

Will our door in Llandudno be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Industrial door motor replacement near Llandudno

Llandudno is in the LL30 postcode district in Clwyd. We also cover Colwyn Bay, Rhyl, Bangor (Gwynedd).

Other services in Llandudno

More about Industrial door motor replacement · industrial doors in Llandudno. Last updated 19 October 2026.