Industrial door motor replacement in Bangor (Gwynedd)

At a glance

Motor replacement in Bangor (Gwynedd) starts with a chargeable diagnostic visit, then a written fixed price for the new drive and any other repairs the door needs before it goes back into use.

Town: Bangor (Gwynedd)
Postcode district: LL57
Area: Gwynedd
Guide price: £845 – £2,395

What's included

Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.
Matched drives. Motor torque, speed and mounting matched to the door's weight and size.
Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.

Typical scopes of work

Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
Changing a tubular motor in a small service shutter that overheats and trips during busy periods.

Who is responsible for door safety at a site in Bangor (Gwynedd)?

In Wales, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Planning the work around your site

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Guide prices

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Questions from businesses in Bangor (Gwynedd)

Will our door in Bangor (Gwynedd) be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

How much does an industrial door motor replacement cost in Bangor (Gwynedd)?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Bangor (Gwynedd) costs £145 to £195 ex VAT.

Is the motor really the problem with our door in Bangor (Gwynedd)?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Industrial door motor replacement near Bangor (Gwynedd)

Besides Bangor (Gwynedd), we can survey and quote for sites in Llangefni, Caernarfon, Llandudno and the rest of Gwynedd.

Other services in Bangor (Gwynedd)

More about Industrial door motor replacement · industrial doors in Bangor (Gwynedd). Last updated 19 October 2026.