Industrial roller shutters in Bangor (Gwynedd)

The short version

We can fit new steel roller shutters and replace old, damaged ones in Bangor (Gwynedd) and across Gwynedd, with strip-out, disposal and any new framing priced up front after a free site survey.

Town: Bangor (Gwynedd)
Postcode district: LL57
Area: Gwynedd
Survey: Free for new installations

What to specify

Colour finishes. Plain galvanised or powder-coated to a RAL colour.
Compact coil. The curtain winds onto a barrel above the opening, leaving floor and roof space free.
Manual override. If the power fails, the shutter can still be wound open by hand.
Safety devices. Motorised shutters get the safety functions their risk assessment needs before handover.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.

Examples of work we can quote for

Face-fixing a roller shutter with a steel hood where internal racking leaves no room behind the opening.
Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.

Powered door rules that apply in Bangor (Gwynedd)

Bangor (Gwynedd) is in Wales, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Access, phasing and timing

For busy sites in Gwynedd the work can be split across visits — preparation and framing first, door installation and commissioning second — so the opening is only out of action for the shortest time.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Can you convert our manual shutter in Bangor (Gwynedd) to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

How much is an industrial roller shutter in Bangor (Gwynedd)?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Bangor (Gwynedd), we confirm a fixed price for your opening in writing.

Does an electric roller shutter at our Bangor (Gwynedd) site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Industrial roller shutters near Bangor (Gwynedd)

Besides Bangor (Gwynedd), we can survey and quote for sites in Llangefni, Caernarfon, Llandudno and the rest of Gwynedd.

Other services in Bangor (Gwynedd)

More about Industrial roller shutters · industrial doors in Bangor (Gwynedd). Last updated 19 October 2026.