Industrial roller shutters in Holyhead

At a glance

Need a tough, space-saving door for a unit in Holyhead? Single-skin steel roller shutters coil neatly above the opening and can be manual or electric, with security upgrades where your insurer requires them.

Town: Holyhead
Postcode district: LL65
Area: Gwynedd
Survey: Free for new installations

What to specify

Compact coil. Nothing runs back under the roof: the shutter coils up neatly above the lintel.
Mounting options. We mount the shutter wherever it fits most easily, including outside with a hood over the coil.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Manual override. Powered shutters keep a chain or handle override so they open without power.
Colour finishes. Plain galvanised or powder-coated to a RAL colour.

What this work can involve

Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.
Converting hand-chained shutters on a storage unit to electric operation with key-switch controls and safety edges.

Who is responsible for door safety at a site in Holyhead?

In Wales, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

Keeping your site running during the work

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Your questions about industrial roller shutters

Can you convert our manual shutter in Holyhead to electric?

Often, yes, if the barrel, curtain and guides are in good condition. Our guide price for a conversion is £1,195 to £3,195 ex VAT. We become responsible for the conformity paperwork on the converted door and fit the safety devices it needs.

Does an electric roller shutter at our Holyhead site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

How quickly can a roller shutter be fitted in Holyhead?

Once the made-to-measure shutter arrives, most single doors are fitted and commissioned in a day. The manufacturer's lead time is confirmed with your quote, and installation is booked around your opening hours.

Industrial roller shutters near Holyhead

Besides Holyhead, we can survey and quote for sites in Llangefni, Caernarfon, Bangor (Gwynedd) and the rest of Gwynedd.

Other services in Holyhead

More about Industrial roller shutters · industrial doors in Holyhead. Last updated 19 October 2026.