Industrial door motor replacement in Sandown

At a glance

Replacing a door motor at a site in Sandown is a chance to upgrade the control panel too, adding inverter control, remotes, loops or traffic lights at the same time.

Town: Sandown
Postcode district: PO36
Area: Isle of Wight
Guide price: £845 – £2,395

How we look after doors in Sandown

Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.
Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.
Written records. A record of the work and tests for your maintenance file.

Examples of work we can quote for

Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.

Powered door rules that apply in Sandown

Sandown is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

Service and repair visits in Sandown are booked around your shifts. Doors and shutters are taken out of use one at a time, so the rest of the site keeps working while each one is checked.

Guide prices for industrial door motor replacement

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Guide prices apply to mainland UK sites. For Sandown, travel and access costs are added and shown in your written quote.

Frequently asked questions

How soon can a door motor in Sandown be replaced?

Many common motors can be sourced quickly, and fitting usually takes a few hours once the drive is on site. Specialist or obsolete motors may need ordering; we tell you the lead time with the quote.

Will our door in Sandown be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Is the motor really the problem with our door in Sandown?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Industrial door motor replacement: other towns we cover

We take on work in Sandown (PO36) by arrangement; timing depends on travel and access, and any extra costs are set out in your quote before you commit.

Other services in Sandown

More about Industrial door motor replacement · industrial doors in Sandown. Last updated 19 October 2026.