Industrial door motor replacement in Gosport

At a glance

Replacing a door motor at a site in Gosport is a chance to upgrade the control panel too, adding inverter control, remotes, loops or traffic lights at the same time.

Town: Gosport
Postcode district: PO12
Area: Hampshire
Guide price: £845 – £2,395

What the visit covers in Gosport

Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Panel upgrades. New control panels with monitored safety inputs and inverter options.
Fault diagnosis. We check whether the motor, panel, supply or door is at fault before replacing anything.
Brake and override. Brakes tested and manual override checked on every change.

What this work can involve

Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.
Upgrading an old relay control panel to a modern unit with monitored safety edge inputs during a motor change.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.

Powered door rules that apply in Gosport

Gosport is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Planning the work around your site

On a first visit we record each door's make, size, control type and condition. That record makes later repairs quicker to price and helps you plan replacements before a door fails.

Prices for industrial door motor replacement in Gosport

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Frequently asked questions

Should we replace the whole door instead of the motor in Gosport?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Can you replace an obsolete door motor in Gosport?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

How much does an industrial door motor replacement cost in Gosport?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Gosport costs £145 to £195 ex VAT.

Industrial door motor replacement near Gosport

Besides Gosport, we can survey and quote for sites in Portsmouth, Fareham, Ryde and the rest of Hampshire.

Other services in Gosport

More about Industrial door motor replacement · industrial doors in Gosport. Last updated 19 October 2026.