Industrial door motor replacement in Deal

In short

Replacing a door motor at a site in Deal is a chance to upgrade the control panel too, adding inverter control, remotes, loops or traffic lights at the same time.

Town: Deal
Postcode district: CT14
Area: Kent
Guide price: £845 – £2,395

What our engineers check and fix

Matched drives. Motor torque, speed and mounting matched to the door's weight and size.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.
Re-commissioning. Limits set, cycles tested and safety devices checked before handover.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.
Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.

Typical scopes of work

Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Changing a tubular motor in a small service shutter that overheats and trips during busy periods.

Safety law for industrial doors in England

Industrial doors in Deal are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Planning the work around your site

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Guide prices for industrial door motor replacement

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Your questions about industrial door motor replacement

Is the motor really the problem with our door in Deal?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Do you replace motors on any make of door across Kent?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Kent, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

Should we replace the whole door instead of the motor in Deal?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Industrial door motor replacement near Deal

Deal is in the CT14 postcode district in Kent. We also cover Dover, Ramsgate, Broadstairs.

Other services in Deal

More about Industrial door motor replacement · industrial doors in Deal. Last updated 19 October 2026.