Industrial door motor replacement in Margate

The short version

We can replace failed and obsolete door motors in Margate and across Kent, from tubular motors in small service shutters to heavy-duty chain drives on large, heavy sectional and sliding doors.

Town: Margate
Postcode district: CT9
Area: Kent
Guide price: £845 – £2,395

What the visit covers in Margate

Written records. A record of the work and tests for your maintenance file.
Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.
Matched drives. Each replacement drive is selected for the door it will move, not just the old part number.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.
Force testing. Closing forces measured to BS EN 12453 where the door closes under power.

Typical scopes of work

Re-commissioning a sectional door once a new motor is fitted, including new limit settings and closing force tests.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.

Powered door rules that apply in Margate

Margate is in England, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Service and repair visits in Margate are booked around your shifts. Doors and shutters are taken out of use one at a time, so the rest of the site keeps working while each one is checked.

Budgeting for industrial door motor replacement in Margate

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Frequently asked questions

Should we replace the whole door instead of the motor in Margate?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

How much does an industrial door motor replacement cost in Margate?

Our guide price for a replacement motor is £845 to £2,395 ex VAT, supplied and fitted, depending on door size, drive type and whether a new control panel is needed. A diagnostic repair visit in Margate costs £145 to £195 ex VAT.

Is the motor really the problem with our door in Margate?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Industrial door motor replacement near Margate

Besides Margate, we can survey and quote for sites in Broadstairs, Ramsgate, Deal and the rest of Kent.

Other services in Margate

More about Industrial door motor replacement · industrial doors in Margate. Last updated 19 October 2026.