Industrial door motor replacement in Whitstable

In short

Replacing a door motor at a site in Whitstable is a chance to upgrade the control panel too, adding inverter control, remotes, loops or traffic lights at the same time.

Town: Whitstable
Postcode district: CT5
Area: Kent
Guide price: £845 – £2,395

How we look after doors in Whitstable

Panel upgrades. New control panels with monitored safety inputs and inverter options.
Force testing. Where it applies, we measure closing forces to confirm the door is safe after the change.
Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.
Brake and override. Brakes tested and manual override checked on every change.
Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.

Examples of work we can quote for

Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.
Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.

Safety law for industrial doors in England

Industrial doors in Whitstable are covered by the same rules as the rest of Great Britain. On handover you should receive user instructions and, for a powered door, the conformity paperwork, because the installer is treated as the manufacturer when they assemble or motorise it. Afterwards, keeping the door in efficient working order is the occupier's job under the Workplace Regulations 1992 and PUWER 1998, which in practice means regular servicing and a written log.

Planning the work around your site

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Prices for industrial door motor replacement in Whitstable

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Industrial door motor replacement in Whitstable: your questions

Should we replace the whole door instead of the motor in Whitstable?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Is the motor really the problem with our door in Whitstable?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Will our door in Whitstable be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Industrial door motor replacement near Whitstable

Our teams cover Whitstable (CT5) and nearby Herne Bay, Canterbury, Faversham, along with the rest of Kent.

Other services in Whitstable

More about Industrial door motor replacement · industrial doors in Whitstable. Last updated 19 October 2026.