Industrial door motor replacement in Cambuslang

In short

Replacing a door motor at a site in Cambuslang is a chance to upgrade the control panel too, adding inverter control, remotes, loops or traffic lights at the same time.

Town: Cambuslang
Postcode district: G72
Area: Lanarkshire
Guide price: £845 – £2,395

What the visit covers in Cambuslang

Force testing. Closing forces measured to BS EN 12453 where the door closes under power.
Panel upgrades. Older panels can be replaced at the same time for better reliability and safety.
Matched drives. Motor torque, speed and mounting matched to the door's weight and size.
Brake and override. The new drive holds the door securely and can still be opened by hand in a power cut.
Obsolete motors. Equivalent drives with adapters where the original model is no longer made.

What this work can involve

Diagnosing a stalling roller shutter to confirm whether the motor, a broken spring or the control panel is at fault.
Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.
Fitting an equivalent chain-drive motor with adapter plates to a large sectional door whose original drive is discontinued.

Powered door rules that apply in Cambuslang

Cambuslang is in Scotland, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

On a first visit we record each door's make, size, control type and condition. That record makes later repairs quicker to price and helps you plan replacements before a door fails.

Budgeting for industrial door motor replacement in Cambuslang

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Your questions about industrial door motor replacement

Is the motor really the problem with our door in Cambuslang?

Not always. Broken springs, damaged guides, failed panels, safety device faults and supply problems can all look like a failed motor. We diagnose first so you do not pay for a motor that will not fix the fault.

Do you replace motors on any make of door across Lanarkshire?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Lanarkshire, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

Should we replace the whole door instead of the motor in Cambuslang?

If the door itself is old, damaged or needs several other repairs, replacement can be better value. We price both where it makes sense, so you can weigh up the cost and remaining life honestly.

Industrial door motor replacement near Cambuslang

Our teams cover Cambuslang (G72) and nearby Rutherglen, East Kilbride, Easterhouse, along with the rest of Lanarkshire.

Other services in Cambuslang

More about Industrial door motor replacement · industrial doors in Cambuslang. Last updated 19 October 2026.