Industrial door motor replacement Renfrewshire and Dunbartonsh

In short

We can replace failed and obsolete door motors in Renfrewshire and Dunbartonshire and across Scotland, from tubular motors in small service shutters to heavy-duty chain drives on large, heavy sectional and sliding doors.

Area: Renfrewshire and Dunbartonshire
Nation: Scotland
Main town: Paisley
Guide price: £845 – £2,395

How we look after doors in Renfrewshire and Dunbartonshire

Re-commissioning. The door is fully re-commissioned and tested before it goes back into use.
Obsolete motors. When a motor is discontinued, we fit a suitable alternative and adapt the mounting.
Matched drives. Motor torque, speed and mounting matched to the door's weight and size.
Written records. You receive written details of the new drive and test results for your records.
Fault diagnosis. Diagnosis comes first, so you only pay for the parts the door actually needs.

Examples of work we can quote for

Fitting a centre-mounted motor where an end-mounted replacement would clash with racking beside the door.
Replacing a motor with a slipping brake on a heavy shutter that creeps down from a part-open position.
Replacing a burnt-out direct-drive motor on a loading bay door and fitting an inverter control panel at the same time.

Powered door rules that apply in Renfrewshire and Dunbartonshire

Renfrewshire and Dunbartonshire is in Scotland, where powered industrial doors fall under Great Britain's health and safety law. Whoever makes a door powered — including converting a manual door — usually takes on the manufacturer's duties under the Supply of Machinery (Safety) Regulations 2008: risk assessment, technical file, conformity marking and a Declaration of Conformity. Once it is in use, the employer or occupier must keep it safe under the Workplace (Health, Safety and Welfare) Regulations 1992 and PUWER 1998.

Keeping your site running during the work

Testing and repairs can mean closing an opening, so we agree timing and access with you before the visit, including early, late or weekend slots where the site needs them.

Budgeting for industrial door motor replacement in Renfrewshire and Dunbartonshire

Industrial door motor replacement guide prices
Item	Guide price (ex VAT)
Motor replacement	£845 – £2,395
Repair visit (attendance and first hour)	£145 – £195

Guide prices excluding VAT, which is added at the current rate where it applies. The visit price is agreed before we attend, and any repair is quoted before we carry it out.

Industrial door motor replacement in Renfrewshire and Dunbartonshire: your questions

Can you replace an obsolete door motor in Renfrewshire and Dunbartonshire?

Yes. Where the original is no longer made, we fit an equivalent drive with any adapter plates or couplings needed, then set limits and test the safety devices before the door goes back into use.

Will our door in Renfrewshire and Dunbartonshire be tested after the motor is changed?

Yes. We set limits, test the brake and manual override, check safety devices and measure closing forces where required, then give you a written record of the work and test results.

Do you replace motors on any make of door across Scotland?

We replace motors on most makes of roller shutter, sectional, sliding and high-speed door across Scotland, whoever installed them, subject to a suitable drive being available for the door's weight and mounting.

Towns in Renfrewshire and Dunbartonshire we cover

We cover 10 towns in Renfrewshire and Dunbartonshire for industrial door motor replacement, including Paisley, Greenock, Bearsden, Newton Mearns.

Other services in Renfrewshire and Dunbartonshire

More about Industrial door motor replacement. Last updated 19 October 2026.

Industrial door motor replacement in Renfrewshire and Dunbartonshire