Industrial roller shutters in Renfrewshire and Dunbartonshire

The short version

We can fit new steel roller shutters and replace old, damaged ones in Renfrewshire and Dunbartonshire and across Scotland, with strip-out, disposal and any new framing priced up front after a free site survey.

Area: Renfrewshire and Dunbartonshire
Nation: Scotland
Main town: Paisley
Survey: Free for new installations

Options for industrial roller shutters in Renfrewshire and Dunbartonshire

Colour finishes. Leave it galvanised or choose a colour that matches the building.
Manual or electric. Push-up, chain hoist or motorised operation depending on how often the door opens.
Mounting options. Fixed inside, in the reveal or face-fixed outside with a protective hood.
Security. Locking options for everyday security, and certified rated shutters where insurers ask for them.
Steel curtains. Galvanised steel laths in gauges to suit the width and the level of abuse expected.

Examples of work we can quote for

Renewing the bottom rail, floor seal and end locks on a roller shutter that jams in its guides.
Replacing a run of rusted shutters on a block of trade units, finished in one matching RAL colour.
Installing perforated shutters across a covered loading area so the space stays ventilated and visible when locked.

Who is responsible for door safety at a site in Renfrewshire and Dunbartonshire?

In Scotland, two sets of duties meet at a powered door. The installer who supplies or motorises it must hand over a door that meets the Supply of Machinery (Safety) Regulations 2008, tested against BS EN 12453 and documented. The business in control of the premises must then maintain it: regulation 5 of the Workplace Regulations 1992 covers maintenance, and regulation 18 requires upward-opening doors to have a device that stops them falling back and powered doors to have features that prevent trapping.

How the work is organised

Where a door is being replaced, the opening has to be made secure at the end of each day. We plan strip-out, any new framing and the new door so the gap is never left open overnight unless you have agreed temporary measures.

Guide prices for industrial roller shutters

Industrial roller shutters guide prices
Item	Guide price (ex VAT)
Industrial roller shutter, single-skin steel, electric (to c. 4 × 4 m)	£2,395 – £5,495
Manual-to-electric conversion	£1,195 – £3,195
Strip-out and disposal on replacement	£345 – £1,195 per door

Guide prices for supply and installation unless stated, excluding VAT, which is added at the current rate where it applies. Your fixed price is confirmed in writing after a survey, before any work starts.

Questions from businesses in Renfrewshire and Dunbartonshire

How much is an industrial roller shutter in Renfrewshire and Dunbartonshire?

An electric single-skin steel roller shutter up to about 4 × 4 m has a guide price of £2,395 to £5,495 ex VAT, supplied and fitted. After a free survey in Renfrewshire and Dunbartonshire, we confirm a fixed price for your opening in writing.

Does an electric roller shutter at our Renfrewshire and Dunbartonshire site need safety devices?

It depends on the risk assessment. A hold-to-run shutter in view of the operator may need little more than force limiting, while one that closes automatically typically needs a safety edge and photocells, tested to BS EN 12453.

Do you remove old shutters at sites in Renfrewshire and Dunbartonshire?

Yes. Strip-out and disposal of the old shutter is shown as a separate line in the quote, along with any repairs to the opening. The old door normally comes out as part of the same visit that fits the new one.

Towns in Renfrewshire and Dunbartonshire we cover

We cover 10 towns in Renfrewshire and Dunbartonshire for industrial roller shutters, including Paisley, Greenock, Bearsden, Newton Mearns.

Other services in Renfrewshire and Dunbartonshire

More about Industrial roller shutters. Last updated 19 October 2026.